A review on fly ash utilization
M Mathapati, K Amate, CD Prasad… - Materials Today …, 2022 - Elsevier
The coal-fired power plant produces a by-product called as fly ash. Large quantity of fly ash
is generated throughout the world and storage as well as disposal of this menace is a …
is generated throughout the world and storage as well as disposal of this menace is a …
A review on tribological and corrosion behaviour of thermal spray coatings
Traditional steels and alloys face challenges in resisting high-temperature oxidation and
corrosion, especially as boilers are operated at elevated temperatures. This issue has …
corrosion, especially as boilers are operated at elevated temperatures. This issue has …
Effect of Mo-and SiC-reinforced NiCr microwave cladding on microstructure, mechanical and wear properties
A microwave hybrid heating technique was applied to produce the NiCr-Mo-SiC composite
cladding on Titan-31. The developed claddings were tested for microstructural features …
cladding on Titan-31. The developed claddings were tested for microstructural features …
Characterisation and wear behaviour of SiC reinforced FeNiCrMo composite coating by HVOF process
Analysis of the sliding wear and microstructural characteristics of iron based composite
coatings are discussed. The feedstock, which consisted of 30% SiC and 70% FeNiCrMo …
coatings are discussed. The feedstock, which consisted of 30% SiC and 70% FeNiCrMo …
Synthesis and wire EDM characteristics of Cu–Al–Mn ternary shape memory alloys using Taguchi method
N Praveen, US Mallik, AG Shivasiddaramaih… - Journal of The Institution …, 2024 - Springer
Abstract Cu–Al–Mn ternary shape memory alloys (SMAs) were synthesized and investigated
for their surface roughness (Ra). Cu–Al–Mn SMAs were prepared through the ingot …
for their surface roughness (Ra). Cu–Al–Mn SMAs were prepared through the ingot …
Optimization of Friction Stir Welding Parameters to Enhance Weld Nugget Hardness in AA6061-B4C Composite Material
C Manjunatha, TN Sreenivasa, P Sanjay… - Journal of The Institution …, 2024 - Springer
In this study, the weldability of aluminium composite made of 10 weight percent of B4C as
reinforcement and AA6061 as the matrix material is the main emphasis. For the study's …
reinforcement and AA6061 as the matrix material is the main emphasis. For the study's …
Effect of CNC end milling parameters on Cu–Al–Mn ternary shape memory alloys using Taguchi method
N Praveen, US Mallik, AG Shivasiddaramaiah… - Journal of The Institution …, 2023 - Springer
CNC milling is a common technique for material removal that is used to create components
with complex shapes and features. The purpose of the experiment is to determine how the …
with complex shapes and features. The purpose of the experiment is to determine how the …
Investigation of High-Temperature Erosion Behavior of NiCrAlY/TiO2 Plasma Coatings on Titanium Substrate
The current study examines the erosive behaviour of a 65% NiCrAlY+ 35% TiO2 plasma-
sprayed coating on titanium-15 substrate at various temperatures. X-ray diffraction and …
sprayed coating on titanium-15 substrate at various temperatures. X-ray diffraction and …
Elevated temperature erosion performance of plasma sprayed NiCrAlY/TiO2 coating on MDN 420 steel substrate
The current study deals with the erosion behaviour of a plasma-sprayed 70% NiCrAlY+ 30%
TiO 2 coating on MDN 420 steel substrate at extreme temperatures. The coating was …
TiO 2 coating on MDN 420 steel substrate at extreme temperatures. The coating was …
Comparative analysis of CoCrAlY coatings at high-temperature oxidation behavior using different reinforcement composition profiles
The oxidation behaviour of plasma-sprayed carbides and oxides reinforced composite
CoCrAlY coatings at 700° C was examined in this paper. CoCrAlY was reinforced with …
CoCrAlY coatings at 700° C was examined in this paper. CoCrAlY was reinforced with …