Whenever two or more dissimilar materials are bonded, large jump in the stresses occurred
at the interface during the fabrication will leads to the delamination and poor load-bearing …

The weak adhesion of diamond-like carbon (DLC) films on glass has hindered their
widespread application. Despite extensive research on interlayers to enhance adhesion, the …

Ti-doped amorphous carbon multilayer films with different Ti content are deposited on
medical Ti6Al4V alloy using a closed field unbalanced magnetron sputtering. The …

Ti-contained aC gradient composite film with a thickness 1.5 μm was deposited on medical
Ti6Al4V alloy substrate using a closed field unbalanced magnetron sputtering with bias …

Ensuring a high adhesion of amorphous carbon films to steel substrates remains a
challenging task, sustaining continuous research efforts to improve the adhesion strength …

In this study, functionally gradient diamond-like carbon (FGDLC) films are fabricated using a
novel pulsed laser deposition technique to enhance adhesion strength. A 355nm …

Despite the economic and environmental benefits of biodiesel, it poses significant
challenges, including coking on metal surface and increased wear on diesel engine injector …

We studied the effect of CrC interlayers with different carbon contents on the adhesion of
CrC/aC: H coatings prepared by anode assisted reactive magnetron sputtering combined …

В монографии приведены результаты исследований по получению нового поколения
композиционных материалов–функционально-градиентных материалов (ФГМ) в …

Lead-free solder is increasingly used in the wave soldering but corrosion of the stainless
steel holders frequently occurs and produces deleterious effects. To enhance the service …