Over the last few decades, a substantial amount of e-waste including waste printed circuit
boards (WPCBs) has been produced and is accumulating worldwide. More recently, the rate …

The mass production of steel is inevitably accompanied by large quantities of slags. The
treatment of ironmaking and steelmaking slags is a great challenge in the sustainable …

The influence of temperature on the dephosphorization of hot metal at the low temperature
range of 1300–1450° C with the slag of the low basicity (CaO/SiO2) of about 1.8 is …

At low basicity and low temperature, the dephosphorization behavior and phosphorus
distribution ratio (LP) between slag and molten steel in the double slag and remaining slag …

The green, efficient, and pollution-free recycling of metallurgical waste slag has garnered
global attention. This study reviews the latest technologies for the recycling of steel slag (SS) …

The effects of interfacial oxygen potential and slag phase changing during slag formation
process on dephosphorization behavior when the decarburization slag is recycled are …

With the development of multiphase slag system for hot-metal treatment to achieve better
dephosphorization efficiency, it is very important to improve the distribution ratio of P 2 O 5 …

In Japan, about 40 million tonnes of slag is generated annually during the iron and
steelmaking process. This large amount of byproduct warrants investigation on its disposal …

By applying the chemical equilibrium method, the equilibrium between liquid iron and 2CaO∙
SiO 2-3CaO∙ P 2 O 5 solid solution has been measured with oxygen partial pressure of …

The recoverability of FeO and P resources from steelmaking slag was investigated using a
novel mechanical approach involving capillary action. After determining the phase …