High temperature oxidation and microstructural evolution of cold spray chromium coatings on Zircaloy-4 in steam environments
H Yeom, B Maier, G Johnson, T Dabney… - Journal of Nuclear …, 2019 - Elsevier
Oxidation kinetics and microstructural evolution of cold sprayed Cr coatings on Zircaloy-4 at
1130–1310° C in flowing steam at atmospheric pressure have been studied. The study is …
1130–1310° C in flowing steam at atmospheric pressure have been studied. The study is …
Characteristics of oxide scale formed on ferritic stainless steels in simulated reheating atmosphere
The aim of this study is to optimise the stainless steel oxidation behaviours during hot rolling.
The high temperature oxidation behaviours of ferritic stainless steels B443NT and B445J1M …
The high temperature oxidation behaviours of ferritic stainless steels B443NT and B445J1M …
Investigation of Cr–Al composite coatings fabricated on pure Ti substrate via mechanical alloying method: effects of Cr–Al ratio and milling time on coating, and …
C Chen, J Zhang, C Duan, X Feng, Y Shen - Journal of Alloys and …, 2016 - Elsevier
Cr–Al composite coatings were successfully fabricated on pure Ti substrate using
mechanical alloying method. The coating consisted of an inner composite layer of coarse Cr …
mechanical alloying method. The coating consisted of an inner composite layer of coarse Cr …
Investigation into the failure mechanism of chromia scale thermally grown on an austenitic stainless steel in pure steam
J Yuan, W Wang, H Zhang, L Zhu, S Zhu, F Wang - Corrosion Science, 2016 - Elsevier
The corrosion behavior of a commercial austenitic stainless steel HR3C was investigated in
air and in pure steam at 700° C, and the results are compared. The results show that the …
air and in pure steam at 700° C, and the results are compared. The results show that the …
Preparation and characterization of slurry aluminide coating on Super304H boiler tube in combination with heat-treatment process
J Lu, Y Dang, J Huang, Y Zhou, Z Yang, J Yan… - Surface and Coatings …, 2019 - Elsevier
Aluminide coating, intended for application in ultra-supercritical boilers with a steam
temperature of 650° C, was deposited on the inner surface of Super304H steel tube in …
temperature of 650° C, was deposited on the inner surface of Super304H steel tube in …
Performance of HIPIMS deposited CrN/NbN nanostructured coatings exposed to 650 C in pure steam environment
PE Hovsepian, AP Ehiasarian, YP Purandare… - Materials chemistry and …, 2016 - Elsevier
In the current work, 4 μm thick CrN/NbN coating utilising nanoscale multilayer structure with
bi-layer thickness of Δ= 2.9 nm has been used to protect 9 wt% Cr steels such as P92 widely …
bi-layer thickness of Δ= 2.9 nm has been used to protect 9 wt% Cr steels such as P92 widely …
Investigation of hybrid Zr-aminosilane treatment formation on zinc substrate and comparison to advanced high strength stainless steel
M Nabizadeh, K Marcoen, MD Havigh, T Kolberg… - Applied Surface …, 2023 - Elsevier
This research investigates the deposition mechanism of a hybrid Zr-aminosilane conversion
coating as a replacement for the conventional pretreatment systems on a zinc substrate. The …
coating as a replacement for the conventional pretreatment systems on a zinc substrate. The …
Comparative study of CrAlSiN monolayer and CrN/AlSiN superlattice multilayer coatings: Behavior at high temperature in steam atmosphere
A Illana, E Almandoz, GG Fuentes, FJ Pérez… - Journal of Alloys and …, 2019 - Elsevier
Protective coatings that retard ionic diffusion at high temperature in the presence of steam
are of interest for the energy industry. A CrAlSiN monolayer and two CrN/AlSiN coatings of …
are of interest for the energy industry. A CrAlSiN monolayer and two CrN/AlSiN coatings of …
Corrosion behavior of Fe-based candidate accident tolerant fuel cladding alloys in spent fuel pool environment―Effect of prior corrosion
The corrosion behavior of Fe-based candidate accident tolerant fuel (ATF) cladding alloys,
such as FeCrAl and FeNiCrAl alloys, in simulated spent fuel pool (SFP) water was …
such as FeCrAl and FeNiCrAl alloys, in simulated spent fuel pool (SFP) water was …
High temperature oxidation in boiler environment of chromized steel
FF Alia, T Kurniawan, YP Asmara… - IOP Conference …, 2017 - iopscience.iop.org
The demand for increasing efficiency has led to the development and construction of higher
operating temperature power plant. This condition may lead to more severe thickness losses …
operating temperature power plant. This condition may lead to more severe thickness losses …