Although the present edition of Fundamentals of Creep in Metals and Alloys remains broadly
up to date for metals, there are a range of improvements and updates that are either …

A temperature-dependent anisotropic material model for use in a coupled thermo-
mechanical finite element analysis of the forming of aluminum sheets was developed. The …

Tensile and compressive creep tests were performed at 300° C on high-temperature Al–Cu–
Mn–Zr (ACMZ) alloys with 6 wt% Cu (6Cu) and 9 wt% Cu (9Cu) to evaluate the effect on …

In this study, the tensile flow behaviour of AA5182-O sheet was experimentally obtained in
different material directions (RD, DD, and TD) at strain rates ranging from 0.001 to 1000 s− 1 …

The microstructural evolution during tensile deformation of an AZ31 alloy with grain size
ranging from 17 to 40 µ m, at intermediate temperatures, has been studied using electron …

The plastic deformation of seven 5083 commercial aluminum materials, produced from five
different alloy heats, are evaluated under conditions of interest for superplastic and quick …

Stress serration patterns and kinematics of deformation bands associated with the Portevin–
Le Chatelier effect in an Al–Mg alloy were investigated by analyzing the evolution of the …

Hot deformation behavior of the new alloy 1580 sparingly doped with scandium (Al-5Mg-0.6
Mn-0.10 Sc-0.11 Zr) was studied under the deformation temperature ranging from 350 to …

This study introduces retrogression forming, a new warm-forming methodology for high-
strength aluminum alloys such as AA7075-T6. Retrogression forming combines a …

The mechanisms of tensile failure in four 5083 aluminum sheet materials are evaluated
under conditions of interest for superplastic and quick-plastic forming. Two mechanisms are …