Recent status of chemical bath deposited metal chalcogenide and metal oxide thin films

SM Pawar, BS Pawar, JH Kim, OS Joo… - Current Applied …, 2011 - Elsevier
Presently nanocrystalline materials have opened a new chapter in the field of electronic
applications, since material properties could be changed by changing the crystallite size …

A comprehensive review on ZnS: From synthesis to an approach on solar cell

S Ummartyotin, Y Infahsaeng - Renewable and Sustainable Energy …, 2016 - Elsevier
The interest on ZnS and its modification as ZnS based composite for solar cell based
material has been exponentially increasing. During the past three decades, ZnS has been …

Removal of basic dye Auramine-O by ZnS: Cu nanoparticles loaded on activated carbon: optimization of parameters using response surface methodology with central …

A Asfaram, M Ghaedi, S Agarwal, I Tyagi, VK Gupta - RSC advances, 2015 - pubs.rsc.org
This research is focused on the ultrasound-assisted removal of Auramine-O (AO) dye from
aqueous solutions using ZnS: Cu nanoparticles loaded on activated carbon (ZnS: Cu-NP …

Kinetic, thermodynamic and isotherm studies for acid blue 129 removal from liquids using copper oxide nanoparticle-modified activated carbon as a novel adsorbent

F Nekouei, S Nekouei, I Tyagi, VK Gupta - Journal of Molecular Liquids, 2015 - Elsevier
A novel adsorbent, copper oxide nanoparticle loaded on activated carbon (CuO-NP-AC)
was synthesized by a simple, low cost and efficient procedure. Subsequently, this novel …

Ultrasonic enhancement of the simultaneous removal of quaternary toxic organic dyes by CuO nanoparticles loaded on activated carbon: central composite design …

S Dashamiri, M Ghaedi, K Dashtian, MR Rahimi… - Ultrasonics …, 2016 - Elsevier
Copper oxide nanoparticles loaded on activated carbon (CuO-NPs-AC) were prepared and
fully analyzed and characterized with FE-SEM, XRD and FT-IR. Subsequently, this novel …

Rapid removal of Auramine-O and Methylene blue by ZnS: Cu nanoparticles loaded on activated carbon: a response surface methodology approach

A Asfaram, M Ghaedi, S Hajati, M Rezaeinejad… - Journal of the Taiwan …, 2015 - Elsevier
The focus of this research is on the rapid ultrasound-assisted removal of Methylene blue
(MB) and Auramine-O (AO) dyes from aqueous solutions using ZnS: Cu nanoparticles …

[HTML][HTML] Experimental design and modeling of ultrasound assisted simultaneous adsorption of cationic dyes onto ZnS: Mn-NPs-AC from binary mixture

A Asfaram, M Ghaedi, F Yousefi, M Dastkhoon - Ultrasonics sonochemistry, 2016 - Elsevier
The manganese impregnated zinc sulfide nanoparticles deposited on activated carbon
(ZnS: Mn-NPs-AC) which fully was synthesized and characterized successfully applied for …

Electrochemical analysis of thermally treated two dimensional zinc sulphide hexagonal nano-sheets with reduced band gap

P Phogat, R Jha, S Singh - Physica Scripta, 2023 - iopscience.iop.org
Abstract Significantly reduced band gap (2.0 eV) zinc sulphide (ZnS) nanoparticles are
synthesized using microwave/ultraviolet/ultrasonic assisted hydrothermal route in a two step …

Comparison of the efficiency of palladium and silver nanoparticles loaded on activated carbon and zinc oxide nanorods loaded on activated carbon as new …

M Ghaedi, MN Biyareh, SN Kokhdan… - Materials Science and …, 2012 - Elsevier
The adsorption of Congo red (CR) into three new adsorbents including Palladium and silver
nanoparticles loaded on activated carbon (Pd NPs-AC, Ag NPs-AC) and zinc oxide …

Structural and optical properties of ZnS thin films deposited by RF magnetron sputtering

DH Hwang, JH Ahn, KN Hui, KS Hui, YG Son - Nanoscale research letters, 2012 - Springer
Zinc sulfide [ZnS] thin films were deposited on glass substrates using radio frequency
magnetron sputtering. The substrate temperature was varied in the range of 100° C to 400° …