[PDF][PDF] A Review on Quality Enhancement of Oil Palm Trunk Waste by Resin Impregnation: Future Materials.

R Dungani, M Jawaid, HPS Abdul Khalil… - …, 2013 - bioresources.cnr.ncsu.edu
Oil palm trunk (OPT) is a solid waste obtained in large quantities after the felling of oil palm
trees and is available year-round. Scientists and industrialists face difficulties in utilizing …

Investigation of the release rate of biocide and corrosion resistance of vinyl-, acrylic-, and epoxy-based antifouling paints on steel in marine infrastructures

A Jalaie, A Afshaar, SB Mousavi, M Heidari - Polymers, 2023 - mdpi.com
This study comprehensively assesses the release rate of biocides, corrosion effects related
to antifouling, and the physical properties of different paint types. Tests were conducted to …

Influence of Thermal Modification in Nitrogen Atmosphere on Physical and Technological Properties of European Wood Species with Different Structural Features

P Kozakiewicz, A Laskowska, M Drożdżek, J Zawadzki - Coatings, 2022 - mdpi.com
The wood of five European species: black poplar (Populus nigra L.), European beech
(Fagus sylvatica L.), European ash (Fraxinus excelsior L.), European oak (Quercus robur L.) …

A mild method of wood impregnation with biopolymers and resins using 1-ethyl-3-methylimidazolium chloride as carrier

C Croitoru, S Patachia, A Lunguleasa - Chemical Engineering Research …, 2015 - Elsevier
The paper presents a new method of wood surface impregnation with biopolymers and
resins, such as chitosan, zein, gelatine and guaiac resin, by using 1-ethyl-3 …

[PDF][PDF] Impact bending strength and Brinell hardness of densified hardwoods

M Gašparík, M Gaff, L Šafaříková, CR Vallejo… - …, 2016 - researchgate.net
The objective of this research was to determine the influence of wood species (Fagus
sylvatica L. and Populus tremula L.), thickness (4, 6, 10, 18 mm), and degree of densification …

New method of wood impregnation with inorganic compounds using ethyl methylimidazolium chloride as carrier

C Croitoru, S Patachia… - Journal of Wood Chemistry …, 2015 - Taylor & Francis
In this paper, a novel method for wood surface impregnation with inorganic compounds,
such as titanium dioxide, wolfram trioxide, and calcium metasilicate, using an …

Experimental Study of Physical Properties and Impact Bending Strength of Clonal Eucalyptus Wood

M Amer, B Kabouchi, M Rahouti, A Famiri - International Journal of …, 2022 - Springer
The aim of this study is to estimate the physical properties, absorbed energy, impact bending
strength, and Monnin hardness of clonal Eucalyptus wood (E. grandis, E. camaldulensis) …

[PDF][PDF] Effect of boric acid treatment on decay resistance and mechanical properties of poplar wood.

SKH Hashemi, AJ Latibari… - …, 2010 - bioresources.cnr.ncsu.edu
This study was performed to determine the effect of boric acid treatment upon the decay
resistance and mechanical properties of poplar wood. Test specimens were prepared from …

Changes in hardness values of Scotch pine (Pinus sylvestris L.) heat treated with tannin modification under different climatic conditions.

M Güneş, M Altunok - Alfa Mühendislik ve Uygulamalı Bilimler …, 2023 - dergipark.org.tr
It is known that wood material undergoes dimensional changes due to its hygroscopic
property. Various methods, such as impregnation and thermal treatment modification, are …

A durability assessment and structural characterization of biopolymer-impregnated wood

C Croitoru - Drewno. Prace Naukowe. Doniesienia. Komunikaty, 2018 - agro.icm.edu.pl
This paper proposes a mild alternative passive impregnation method of spruce wood with
chitosan and zein biopolymers by using a 1-allyl-3-methylimidazolium chloride ionic liquid …