Investigation on the effects of isothermal holding temperature and time on the coarsening mechanism and rheological properties of ADC12 Al semi-solid slurry
SK Gautam, BK Singh - Materials Chemistry and Physics, 2024 - Elsevier
The current work's key emphasis is on investigating the influence of isothermal holding
temperature and time on the microstructural development and coarsening rate during the …
temperature and time on the microstructural development and coarsening rate during the …
Wear and Mechanical Properties of In Situ A356/5%TiB2 Composite Synthesis by Cooling Slope Technique
The main aim of this study is to understand the microstructure characterization, mechanical
properties and wear behavior of in situ processed A356/5% TiB2 rheocast metal matrix …
properties and wear behavior of in situ processed A356/5% TiB2 rheocast metal matrix …
Fabrication and characterization of ADC-12 hybrid composites utilizing lemon grass ash and boron nitride through stir-squeeze casting method
M Palanivendhan, J Chandradass - Materials Research Express, 2023 - iopscience.iop.org
In recent years, there has been increased interest in hybridizing metal matrix composites
using agro-based-waste materials as sustainable choices. Despite the poor tribo …
using agro-based-waste materials as sustainable choices. Despite the poor tribo …
Studies on mold filling behavior of Al–10.5 Si–1.7 Cu Al alloy during rheo pressure die casting system
An attempt has been made to simulate the mold filling behavior of semi-solid slurry of Al–
10.5 Si–1.7 Cu alloy for rheo-pressure die casting (RPDC) with additional emphasis on the …
10.5 Si–1.7 Cu alloy for rheo-pressure die casting (RPDC) with additional emphasis on the …
Rheological properties of ADC12 Al alloy in the semi-solid state
The present investigation emphasises on rheological behaviour of semi-solid slurry of
ADC12 Al alloy in order to understand mould filling behaviour during semi-solid processing …
ADC12 Al alloy in order to understand mould filling behaviour during semi-solid processing …
Determine the rheological parameters for characterization of semi solid slurry of ADC12 Al alloy
SK Gautam, A Rajak, A Khalkho… - Journal of The Institution of …, 2023 - Springer
The current study required to comprehend the rheological behaviour of semi-solid slurry of
ADC12 aluminium alloy for mould filling simulation during the rheo-pressure die casting …
ADC12 aluminium alloy for mould filling simulation during the rheo-pressure die casting …
Effect of processing parameters of rheocast on mechanical properties of Al–10.5 Si–1.7 Cu alloy
The current study aims to assess the impact of rheocast's input variables (cooling slope
techniques) on its mechanical properties. The rheocast experiment was carried out by …
techniques) on its mechanical properties. The rheocast experiment was carried out by …
Structure Property Correlation of Gravity Die-Cast and Rheocast Al–Mg–Sc–Zr in situ Nano-TiB2 Composite
The present study investigates the structure-property relationship of gravity die-cast and
rheocast in situ processed 1wt% TiB2/Al-3.5 Mg-0.15 Sc-0.075 Zr composites. The …
rheocast in situ processed 1wt% TiB2/Al-3.5 Mg-0.15 Sc-0.075 Zr composites. The …
Experimental investigation and optimization of morphological characteristics in mechanically agitated aluminium 6061‐fly ash cenosphere composite
The current work examines the results of an experimental study for the liquid casting of an
aluminum‐6061‐5 weight% fly ash cenosphere composite by employing stir casting. The …
aluminum‐6061‐5 weight% fly ash cenosphere composite by employing stir casting. The …
Semi-Solid Slurry Preparation Process, Microstructure and Mechanical Properties of Mg–7Al–1Ca–1Sb Alloy
S Song, F Wang, X Du, P Mao, Z Wang, L Zhou… - International Journal of …, 2024 - Springer
In order to promote the application of magnesium (Mg) alloy semi-solid die casting (SSDC)
technology, the semi-solid Mg–7Al–1Ca–1Sb alloy slurry with high solid fraction was …
technology, the semi-solid Mg–7Al–1Ca–1Sb alloy slurry with high solid fraction was …