Adhesion in bitumen/aggregate system: Adhesion mechanism and test methods
A literature review of the five main theories describing the interaction mechanisms in the
bitumen/aggregate system was conducted: theory of weak boundary layers, mechanical …
bitumen/aggregate system was conducted: theory of weak boundary layers, mechanical …
Thermosetting polymer modified asphalts: current status and challenges
Thermosetting polymers have higher heat resistance, chemical resistance, mechanical
characteristics and structural integrity than thermoplastic polymers due to their three …
characteristics and structural integrity than thermoplastic polymers due to their three …
[HTML][HTML] Obtaining and use adhesive promoters to bitumen from the phenolic fraction of coal tar
S Pyshyev, Y Demchuk, I Poliuzhyn… - International journal of …, 2022 - Elsevier
Phenol-cresol-formaldehyde resins (PhCR-F) were obtained via polycondensation of a
mixture of phenols (“raw” phenols) obtained from the phenolic fraction of coal tar. PhCR-F …
mixture of phenols (“raw” phenols) obtained from the phenolic fraction of coal tar. PhCR-F …
Enhancing rheological and aging performance of matrix asphalt through thermoplastic phenol-formaldehyde resin-based intercalated clay nanocomposites …
J Huang, K Yan, M Wang, X Zhang - Construction and Building Materials, 2024 - Elsevier
This research presents a comprehensive investigation into the development of advanced
asphalt materials fortified with PF/OMMT nanocomposites, emphasizing the synergistic …
asphalt materials fortified with PF/OMMT nanocomposites, emphasizing the synergistic …
Obtaining of Formaldehyde Modified Tars and Road Materials on Their Basis
The process of chemical modification of tar and oxidized bitumen with formalin (a 37%
aqueous solution of formaldehyde) in a hermetic container was investigated and the …
aqueous solution of formaldehyde) in a hermetic container was investigated and the …
[PDF][PDF] Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 4. Determining the Optimal Conditions for Tar Modification …
V Gunka, H Bilushchak, Y Prysiazhnyi… - Chem. Chem …, 2022 - science2016.lp.edu.ua
1 The effect of factors on the process of chemical modification of tar with formaldehyde using
a sulfuric acid as the catalyst has been studied. By using experimental results, the adequate …
a sulfuric acid as the catalyst has been studied. By using experimental results, the adequate …
Wastepaper Sludge Ash and Acid Tar as Activated Filler Aggregates for Stone Mastic Asphalt
Nowadays, the most common ways to dispose of acid tars and paper production waste are
burial or incineration, but it is ecologically and economically expedient to use such waste in …
burial or incineration, but it is ecologically and economically expedient to use such waste in …
[PDF][PDF] Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 5. Use of Maleic Anhydride for Foaming Bitumens
The possibility of using maleic anhydride as a foaming agent to produce foamed bitumen
was investigated. The optimal content of maleic anhydride was determined according to the …
was investigated. The optimal content of maleic anhydride was determined according to the …
[PDF][PDF] Adhesion in Bitumen/Aggregate System: Adhesion Mechanism and Test Methods. Coatings 2022, 12, 1934
A literature review of the five main theories describing the interaction mechanisms in the
bitumen/aggregate system was conducted: theory of weak boundary layers, mechanical …
bitumen/aggregate system was conducted: theory of weak boundary layers, mechanical …
[PDF][PDF] Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 6. Temperature effect on the chemical modification of …
1 The oxidized bitumen produced at the Ukrainian refinery was modified with maleic
anhydride. The process temperature was proved to have the most significant effect on …
anhydride. The process temperature was proved to have the most significant effect on …