Peritectic phase formation kinetics of directionally solidifying Sn-Cu alloys within a broad growth rate regime
Previous studies have shown that the peritectic transformation may not occur and,
depending on the cooling rate, the peritectic phase can nucleate and grow directly from the …
depending on the cooling rate, the peritectic phase can nucleate and grow directly from the …
Relationship between cooling rate and SDAS in liquid phase separated metastable Cu–Co alloys
Abstract Cu-50 at% Co and Cu-68.5 at% Co metastable monotectic Cu–Co alloys have
been rapidly solidified in a 6.5 m drop tube facility under nitrogen atmosphere …
been rapidly solidified in a 6.5 m drop tube facility under nitrogen atmosphere …
Phase separation and structural evolution of undercooled Fe–Sn monotectic alloy
N Wang, B Wei - Materials Science and Engineering: A, 2003 - Elsevier
Fe–48.8 wt.% Sn monotectic alloy was rapidly solidified both in a drop tube and with the
glass fluxing method, and its phase separation characteristics and structural evolution are …
glass fluxing method, and its phase separation characteristics and structural evolution are …
Phase selection and nano-mechanical properties of intermetallic compounds in directionally solidified Cu-68at.% Sn peritectic alloy
A Zhang, P Peng, J Yang, X Zhang, Y Xu - Journal of Alloys and …, 2021 - Elsevier
In this work, directional solidification method was used to investigate the growth
characteristics of intermetallic compounds whose solubilities are narrow during solidification …
characteristics of intermetallic compounds whose solubilities are narrow during solidification …
On determining the phase-selection principle in solidification from undercooled melts—competitive nucleation or competitive growth?
M Li §, S Ozawa, K Kuribayashi - Philosophical magazine letters, 2004 - Taylor & Francis
A survey of the published literature on undercooled metallic and oxide melts suggests that
phase selection during solidification can be categorized as nucleation controlled or growth …
phase selection during solidification can be categorized as nucleation controlled or growth …
Microstructure of laser clad TiC/NiAl–Ni3 (Al, Ti, C) wear-resistant intermetallic matrix composite coatings
Y Chen, HM Wang - Materials Letters, 2003 - Elsevier
TiC-reinforced NiAl–Ni3 (Al, Ti, C) intermetallic matrix composite coatings are fabricated by
laser cladding with powder blends of Ni–Al–Ti–C on substrate of electrolyzed nickel plate …
laser cladding with powder blends of Ni–Al–Ti–C on substrate of electrolyzed nickel plate …
Effect of peritectic reaction on dendrite coarsening in directionally solidified Sn–36 at.% Ni alloy
P Peng, X Li, Y Su, D Liu, J Guo, H Fu - Journal of Materials Science, 2012 - Springer
Abstract Effect of peritectic reaction on dendrite coarsening was investigated in directionally
solidified Sn–36 at.% Ni peritectic alloys at different growth rates (2~ 200 μm/s) under …
solidified Sn–36 at.% Ni peritectic alloys at different growth rates (2~ 200 μm/s) under …
Phase selection in undercooled peritectic Fe–Mo alloys
M Leonhardt, W Löser, HG Lindenkreuz - Acta materialia, 2002 - Elsevier
The change of the primary solidification mode of undercooled peritectic Fe–Mo melts has
been studied by in situ observation of recalescence events during electromagnetic levitation …
been studied by in situ observation of recalescence events during electromagnetic levitation …
EBSD study on the effect of second phases and restoration mechanisms in hot deformed new Mn–Ni–Cr alloy
ZS Motlagh, A Momeni, B Tolaminejad… - Materials Chemistry and …, 2022 - Elsevier
Hot compression tests were performed on Mn–25Ni–5Cr at temperatures of 850–1000° C
and strain rates of 0.001–1 s− 1. The flow curves at low strain rates were typical of dynamic …
and strain rates of 0.001–1 s− 1. The flow curves at low strain rates were typical of dynamic …
Effect of Cr addition on microstructures and nanohardness of rapidly solidified Ti–48Al alloy
DD Zhu, HW Wang, JQ Qi, CM Zou… - Materials Science and …, 2012 - journals.sagepub.com
In this present work, the microstructure and nanohardness of rapidly solidified Ti–48 at-Al
alloy with various Cr additions were experimentally investigated using the single roller melt …
alloy with various Cr additions were experimentally investigated using the single roller melt …