Thiosulfate salts have been known to be dangerous corrosion promoters for over 30 y, when
present under typical service conditions. This paper reviews the role of thiosulfate anion in …

Sulfur induced corrosion (SIC) is an important issue taking place in the heat transfer crevices
between steam generator (SG) tubing and tube supports in pressurized water reactors …

The purpose of this study is to investigate the effect of SO42-ions on the pitting potential
(Epit) and critical pitting temperature (CPT) of high-entropy alloy Co1. 5CrFeNi1. 5Ti0. 5Mo0 …

A new three-dimensional peridynamic (PD) model is introduced for pitting corrosion
damage. Based on simple mechanistic views of passivation, salt-layer presence, and …

We report high-resolution SIMS microscopy measurements, which show that many
'MnS'inclusions have surrounding them a narrow 'halo'of half-width typically 100nm that is …

It has been known for many years that highly alloyed stainless steels display a critical pitting
temperature (CPT), which is the lowest temperature at which the growth of stable pits is …

The influence of temperature and the effect of aggressive anions on the electrochemical
behaviour of UNS N08031 stainless steel in a contaminated phosphoric acid solution were …

Thiosulfate is a threat to corrosion resistance of steels in chloride solution. This work
revealed the inhibitory effect of nitrogen (N) on thiosulfate-accelerated corrosion of stainless …

The galvanic corrosion behavior of the 90/10 Cu–Ni alloy coupled to AISI 316L stainless
steel, has been studied at different temperatures (5, 15 and 30° C) and hydrostatic pressures …

In 1 M NaCl, the pitting potentials of resulfurized Type 304 stainless steel decreased as the
temperature increased from 25 C to 75 C. The dissolution potential of MnS in 0.1 M Na 2 SO …