Joining of two materials having different physical, chemical, and thermal properties and to
make the joint tough and stiff, special attention and investigation are required. In this …

The objective of the current study was to analyse the microstructure, mechanical
characteristics, and residual stresses of a dissimilar welded joint (DWJ) made of P92 steel …

In the present research work, the 2.25 Cr1Mo0. 25V steel plates with a thickness of 112 mm
were welded using the multi-pass submerged automatic arc welding process. The creep …

The paper presents the detailed microstructure study and mechanical behavior of P91
welded joint produced by gas tungsten arc welding process (GTAW) using the dissimilar …

Martensitic heat-resistant steel (MHRS) serves as an important structural material for
manufacturing ultra-supercritical unit due to its excellent fatigue resistance and corrosion …

The manuscript described the effect of Ni-based filler on microstructure and mechanical
properties of the dissimilar welded ASTM A335 grade P22 and P91 alloy steel plate. The …

Scanning and transmission electron microscopy was used to characterize quantity, pattern,
size, and distribution of microstructure and precipitated phases in T91 steel exposed to high …

In the present study, the rupture behavior and fracture mode for the Inconel 625–9% Cr steel
dissimilar welded joints are investigated. The results reveal that the relationship between the …

In the current study, the creep properties of magnesium alloy reinforced with SiC particles
were investigated. For this purpose, ZK60/SiCp composite was produced by the stir casting …

Dissimilar pulsed laser welding of 400-μm NiTi and Cu wires was used to investigate the
effect of laser positioning on NiTi-Cu joint performance. Laser positioning was found to have …