Effects of radiation-induced defects on corrosion
The next generation of nuclear reactors will expose materials to conditions that, in some
cases, are even more extreme than those in current fission reactors, inevitably leading to …
cases, are even more extreme than those in current fission reactors, inevitably leading to …
General corrosion and stress corrosion cracking of Alloy 600 in light water reactor primary coolants
PM Scott, P Combrade - Journal of Nuclear Materials, 2019 - Elsevier
The general corrosion and stress corrosion cracking behaviors of the nickel-base Alloy 600
in the primary high temperature aqueous coolants of light water cooled and moderated …
in the primary high temperature aqueous coolants of light water cooled and moderated …
Oxidation resistant FeCoNiCrAl high entropy alloy/AlSi12 composite coatings with excellent adhesion on Ti-6Al-4 V alloy substrate via mechanical alloying and …
J Jiang, W Hou, X Feng, Y Shen - Surface and Coatings Technology, 2023 - Elsevier
In this study, FeCoNiCrAl high entropy alloy/AlSi12 composite coatings were prepared on Ti-
6Al-4V substrate using a newly developed mechanical alloying (MA) and subsequent laser …
6Al-4V substrate using a newly developed mechanical alloying (MA) and subsequent laser …
Controlling the corrosion resistance of multi-principal element alloys
Multi-principal element alloys (MPEAs) offer the possibility of many degrees of freedom in
the choice of alloying elements to produce either single phase solid solutions or more …
the choice of alloying elements to produce either single phase solid solutions or more …
Aqueous passivation of multi-principal element alloy Ni38Fe20Cr22Mn10Co10: Unexpected high Cr enrichment within the passive film
The aqueous passivation of a non-equiatomic Ni 38 Fe 20 Cr 22 Mn 10 Co 10-at.%(Ni 40 Fe
20 Cr 20 Mn 10 Co 10-wt.%) multi-principal element alloy (MPEA) was investigated in 0.1 M …
20 Cr 20 Mn 10 Co 10-wt.%) multi-principal element alloy (MPEA) was investigated in 0.1 M …
The role of Si on microstructure and high-temperature oxidation of CoCr2FeNb0. 5Ni high-entropy alloy coating
M Ma, A Han, Z Zhang, Y Lian, C Zhao, J Zhang - Corrosion Science, 2021 - Elsevier
In this study, the CoCr 2 FeNb 0.5 Ni high-entropy alloys coatings with and without Si were
prepared on Cr-Mo-V steel via laser cladding. The oxidation behaviors of the HEAs coatings …
prepared on Cr-Mo-V steel via laser cladding. The oxidation behaviors of the HEAs coatings …
Very high cycle fatigue durability of an additively manufactured single-crystal Ni-based superalloy
LMB Ormastroni, I Lopez-Galilea, J Pistor, B Ruttert… - Additive …, 2022 - Elsevier
A single crystalline (SX) nickel-based superalloy additively manufactured (AM) by electron
beam-based powder bed fusion (PBF-E) was investigated under very high cycle fatigue …
beam-based powder bed fusion (PBF-E) was investigated under very high cycle fatigue …
Intergranular oxidation of Ni-base alloy 718 with a focus on additive manufacturing
The intergranular oxidation in air at 850° C of alloy 718 produced by laser beam melting and
electron beam melting was compared to that of the wrought alloy. Quantitative analyses …
electron beam melting was compared to that of the wrought alloy. Quantitative analyses …
High-temperature oxidation performance of Inconel 625 superalloy fabricated by wire arc additive manufacturing
High-temperature oxidation behavior of Inconel 625 superalloy manufactured by wire arc
additive manufacturing (WAAM) technique was investigated. Results showed that …
additive manufacturing (WAAM) technique was investigated. Results showed that …
[HTML][HTML] High-temperature oxidation behavior of additively manufactured IN625: Effect of microstructure and grain size
High-temperature oxidation of additively manufactured (AM) Ni-base alloy IN625 has been
studied in air and Ar-5% H 2-3% H 2 O at 900-1000° C. AM material is found to oxidize faster …
studied in air and Ar-5% H 2-3% H 2 O at 900-1000° C. AM material is found to oxidize faster …