High-power direct laser deposition (HP DLD) was utilized to fast generate AISI 316L
stainless steel parts with large size and excellent mechanical properties. In order to …

Although SPS has been studied for a rapidly growing number of materials, there is limited
number of researches on the fabrication and microstructural characterization of stainless …

Additive/subtractive hybrid manufacturing (ASHM) technology is mostly based on direct
energy deposition technology and achieves the direct forming of functional components by …

Four 22% Cr duplex stainless steel alloys containing varying nickel contents of
approximately 5%, 7%, 9% and 13% were melted in a vacuum induction furnace, hot rolled …

The stress-strain behavior of ferrite and austenite in a commercial 2205 duplex stainless
steel was investigated by using nanoindentation test and microstructure-based finite …

Purpose This paper aims to establish the microstructures and the process-structure
relationships in duplex stainless steel powders consolidated by selective laser melting …

The local mechanical properties of ferritic and austenitic domains in a duplex stainless steel
are locally studied by nanoindentation. The elastic and plastic properties of the two phases …

Austenitic, ferritic and duplex stainless steels obtained through powder metallurgy
technology were sintered in vacuum. Powders were compacted at 650 or 750 MPa and …

The hybrid of additive manufacturing and subtractive manufacturing is promising in
producing high-quality and high-accuracy parts made of hard-to-machine metallic materials …

The mechanical properties of individual constituent in a cast austenitic–ferritic stainless steel
were studied using uniaxial micropillar compression tests. The results of compression tests …