The present work is an effort to culminate the status, the scopes and the challenges in the
development of ferrous metal matrix composites (FMMCs). The FMMCs are older but …

Metal matrix composite parts produced using selective laser melting have superior
mechanical properties to those produced using traditional powder metallurgy. In this study …

AISI 304 stainless steel and composites reinforced with various volume fractions of TiB2
particles were fabricated by hot-isostatic pressing. Pin-on-disc measurements were used to …

This work focuses on the role of boron as a sintering additive in powder metallurgy
processing of the AISI 316L austenitic stainless steel. Boron effect was investigated …

The present review focuses on the recent development of steel matrix composites and their
advancement. Stainless steel has broad application but its critical drawbacks, such as poor …

Corrosion is ubiquitous: all engineering systems are subject to environmental degradation in
service environments, whether these systems are used for national defense or to save and …

A study was made of the change in properties of 316L stainless steel depending on the type
and the amount of added reinforcement. The reinforcements used were Cr2Al, Cr2Ti, VC …

Plasma nitriding of austenitic stainless steel may result in the formation of a nitrided layer,
which is responsible for the increase in hardness, as well as wear and corrosion resistance …

Two types of ferritic stainless steel powders (AISI 409LNb and 434L) have been sintered in
vacuum at three different temperatures (1225, 1250 and 1275° C). The corrosion behaviour …

In this paper, cold spray was used as an additive manufacturing method to fabricate 5 mm
thick SiC/Al metal matrix composites with various SiC contents. The effects of SiC contents …