This article reviews the production of renewable aviation fuels from biomass and residual
wastes using gasification followed by syngas conditioning and Fischer-Tropsch catalytic …

Syngas from gasification of carbonaceous feedstocks is used for power production and
synthesis of fuels and commodity chemicals. Impurities in gasification feedstocks, especially …

This work examined acid gas emissions of sulfur dioxide, nitrogen oxide, carbon dioxide,
and hydrogen chloride from co-firing biomass (corn straw and rice husk) with either a high …

The pyrolysis of polyvinyl chloride (PVC) was qualitatively analyzed by TG-FTIR, and HCl
removal efficiency of Ca-based additives were semi-quantitatively studied also by means of …

The product gas produced from gasification of solid fuel contains various impurities such as
particulates, toxin gases, tar, vapours of heavy metals, etc. Presence of tar is a major issue …

The treatment and disposal of waste biomass and plastics are of great importance to
achieve both waste management and resource recycling. In this work, pyrolysis of biomass …

This paper investigates the pyrolysis of outer sheath polymer of a PVCsingle bondCaCO 3
based cable. TG-DSC-MS, temperature-dependent FTIR, XRD and XPS experiments were …

Effective separation of by-product HCl is of great importance for its recovery and high-value
utilization. Herein, a novel strategy for highly efficient and reversible absorption of HCl using …

Mixed plastic wastes are very difficult to mechanically recycle into new products because of
their nonhomogeneity. Therefore, pyrolysis and gasification seem to be very effective in the …

Elevated emissions of hydrogen chloride (HCl) from combustion of biomass in utility boilers
is a major issue as it can cause corrosion and, in combination with the high alkali content …