The formation of electrodeposited amorphous Ni-P alloy requires numerous tiny crystal
nuclei and disorderly arranged atoms. In this paper, laser irradiation is introduced into the …

This work is an experimental study on the formation, characteristics and properties of
electroless nickel phosphorous (Ni–P) coatings and electroless nickel alumina (Ni–P–Al 2 O …

This study adds fluoride to the electroless nickel-phosphorus (Ni–P) plating solution to
prevent the deterioration of MAO-coated AZ31B Magnesium alloy after contact with an …

Abstract Electroless Ni–P (EN) and composite Ni–P–SiC (ENC) coatings were developed on
cast aluminium alloy substrate, LM24. The coating phase composition, microstructure and …

In this study electroless Ni-P coatings were deposited on W302 steel substrates. The effects
of bath pH and heat treatment at 400 C were investigated on the surface morphology, phase …

In this study, a laser-assisted electrodeposition method is used to prepare Ni–Co–W and
amorphous Ni–P coatings for different laser scanning rates. The laser scanning rate is an …

Electroless nickel plating has a variety of useful properties, including high hardness, high
stability, and better corrosion and wear resistance when compared with the stainless steel …

In this article, it has been attempted to investigate and compare the wear behavior of 4 types
of electroless nickel-phosphorous coating (with 4, 5, 9, and 12 wt% P) at 250° C. Changes of …

以2024 铝合金为基体, 开发了环保的直接化学镀镍工艺. 研究了前处理工艺, 镀液pH
和温度对化学镀镍的影响, 得到较佳的工艺为: 先采用10%(体积分数) 盐酸+ 10 g/L Na2MoO4 …

Electroless Ni-P coating is helpful to improve the corrosion resistance and mechanical
properties of the Al alloys. However, the electroless Ni-P plating is usually operated at …