This paper presents a study on the Design of Experiments (DoE) approach to optimize the
electrophoretic deposition (EPD) process parameters for PEEK base coatings. PEEK and …

Polymer coatings have gained a lot of attention in the recent past because of their ability to
be easily coated on complex shapes, their low cost, and their ability to reduce friction as …

In this chapter, the stabilization of nanoparticles in liquid media is studied on the basis of the
colloid science foundations. The most common dispersing mechanisms, ie electrostatic and …

Composite polyetheretherketone (PEEK)/Bioglass® coatings were electrophoretically
deposited on two phase α+ β Ti–6Al–7Nb titanium alloy substrates. A heat treatment was …

This paper presents a study of the Taguchi design method to optimise the rate of
electrophoretic deposition (EPD) of Bioglass® particles from aqueous suspensions. The …

In this study, molybdenum disulfide nanosheets, bioactive hydroxyapatite particles of two
types in various amounts, and PEEK 704 microparticles were electrophoretically co …

Abstract Nanocomposite Si 3 N 4/PEEK coatings were deposited on the model Ti-13Nb-13Zr
titanium alloy by cathodic electrophoretic deposition. The use of different dispersion media …

Abstract In this work, 45–120 μm thick, composite Al 2 O 3/PEEK coatings were fabricated on
the Ti-13Nb-13Zr alloy substrate using electrophoretic deposition. The anodic co-deposition …

In this work, polyetheretherketone-based TiN/PEEK708 nanocomposite coatings on oxygen
hardened Ti-6Al-4V titanium alloy substrates were fabricated by using cathodic …

Cationic and anionic polyelectrolytes were investigated for the application as charging
agents for the electrophoretic deposition (EPD) of polyetheretherketone (PEEK) and …