During the last two decades, the industry (including scientists) has focused on diamond-like
carbon (DLC) coating because of its wide range of application in various fields. This material …

Diamond-like carbon (DLC) films with excellent anti-friction and wear resistance, can
effectively reduce the energy loss of tribosystems and the wear failure of parts, but the high …

Cr doped diamond like carbon (Cr-DLC) coatings were deposited by using a combined
system consisting of middle frequency (MF) magnetron sputtering and ion plating. The …

CrCN coatings were deposited using the multi-arc ion plating with different C 2 H 2 flow
rates. Microstructures, mechanical and tribological performances were systematically …

Low concentration Ti-doped hydrogenated amorphous carbon (Ti-C: H) films were
deposited on silicon wafers by middle frequency magnetron sputtering titanium twin-targets …

The tribological performances of Cr/GLC film coupling with Si 3 N 4, SiC, WC, Al 2 O 3 and
ZrO 2 were comparatively studied in seawater. Results indicated that the Cr/GLC film …

Metal containing hydrogenated diamond-like carbon coatings (Me-DLC, Me= Al, Ti, or Nb) of
3±0.2 μm thickness were deposited by a magnetron sputtering-RFPECVD hybrid process in …

CrCN coatings were deposited on single crystal silicon and 316L stainless steel substrates
using the cathodic arc ion plating technique with different substrate bias voltages that …

The CrN (C) coatings with different carbon contents were deposited using unbalanced
magnetron sputtering via adjusting the carbon target current, and their microstructure and …

A magnetron-sputtered Cr-diamond-like carbon (DLC) coating was deposited on nitrided
Ti6Al4V alloys (TAs) by employing the CrN interlayer. The physical and chemical …