To date, more than fifty articles have been published on the feasibility studies of zinc and its
alloys as biodegradable metals. These preliminary in vitro and in vivo studies showed …

Advanced structural materials are expected to display significantly improved mechanical
properties and this may be achieved, at least in part, by refining the grain size to the …

There has been much research on zinc and its alloys for being used in different industries
and applications, mainly due to their low cost, availability, good wear resistance and …

Superplastic steels with high elongations above 300% are expected to be used for
manufacturing complex-shaped mechanical parts without joining. However, their practical …

Superplastic steels with high elongation above 300% are expected to be used to
manufacture complex-shaped mechanical parts without joining. However, their practical …

In this study, the effect of homogenization heat treatment and equal channel angular
pressing process (ECAP) on microstructure and mechanical properties were explored in Zn …

Monte Carlo (MC) simulation was used to predict the microstructural evolution and the
kinetics of grain growth during heating of Zn–22Al dual phase alloy. As the prediction of MC …

Achieving superplasticity at high temperatures and at very low strain rates is considered to
be the most important disadvange of superplastic forming processes. Therefore, it is crucial …

Abstract Two Zn-Al alloys, eutectoid Zn-22Al and dilute Zn-0.3 Al, were processed through
equal-channel angular pressing (ECAP). The ECAP-processed alloys were subjected to …

Due to limitations in the billet dimension, the tensile anisotropy of billets processed by equal
channel angular pressing (ECAP) are rarely reported. In this work, AZ91 magnesium alloy …