Functionally graded porous (FGP) nanocomposites are the most promising materials among
the manufacturing and materials sector due to their adjustable physical, mechanical, and …

For successful implantation, biomaterials need excellent corrosion and wear resistance in
the body environment, a combination of high strength and low modulus, appropriate ductility …

Abstracts Hybrid silica-graphene oxide (SiO 2@ GO) nanocomposites were fabricated by sol-
gel method using tetraethylorthosilicate (TEOS) as silica (SiO 2) precursor. The prepared …

In the present study, the effect of thermal cycling on the microstructure and tensile properties
of an Fe-17Mn (wt%) alloy were investigated. The thermal cycling was carried out until 10 …

This study investigates the hot deformation behavior and microstructural evolution of wire
arc additive manufactured (WAAMed) NiTi alloy. Hot deformation tests were conducted …

Hardness properties of SAC305 solder wire under tensile test at varied temperature was
investigated. Continuous multicycle (CMC) nanoindentation technique with ten cycle of …

Lost circulation during oil well drilling is a critical challenge, resulting in significant financial
losses and environmental concerns. This study explores the utilization of corn husks as an …

Doping cerium, cerium oxide, and lanthanum-tellurium on aluminum alloy through the
process of sand-casting can modify the alloy's electrical conductivity and tensile strength. In …

Background The oral environment exposes teeth and dental materials to different factors,
such as mastication, humidity, temperature, and pH cycles. Reproducing oral challenges …

In recent years, there has been an increasing demand in the commercial market to prolong
the service life of engine oil. Oil contamination is one of the most important factors that …