Abstract Machine tool bearings made of rare earth modified, highly clean bearing steel
subjected to rolling contact fatigue (RCF) under the same bench test conditions were …

In the present investigation, the use of a bainitic steel for forged gears applications and the
suitability of different plasma nitriding treatments is discussed. The gears were forged …

In gear profile grinding, the grinding burn will greatly influence the anti-fatigue performance
of gears. However, the influence of microstructure change caused by grinding burn on gear …

The premature cracking failure of a driven gear occurred in a high-speed railway gearbox of
a certain line after running 600,000 km. The comprehensive analysis methods, such as …

Analytical modelling is an effective approach to obtaining a gear dynamic response or
vibration pattern for health monitoring and useful life prediction. Many researchers have …

The phenomenon of surface cracks in steering shaft gear after carburizing and quenching
was analyzed by combining experimental research, theoretical analysis, and numerical …

Linear and nonlinear analyses served to detect the degree of tooth damage in a cylindrical
gear. The gear in question is widely used in industrial applications and is often subject to …

Surface pitting of gear teeth flanks is one of the most common causes of gear failure. The
increase of the contact fatigue strength of gears is usually achieved through the …

In this paper, two novel consistency vectors are proposed, which when combined with
appropriate machine learning algorithms, can be used to adapt the Spectral Kurtosis …

To reveal the influence mechanism of the grinding surface quality of 20CrMnTi steel
components on the tribological characteristics and contact fatigue performance, accelerated …