The plasma spray technique was well proven in producing metal oxide based gas sensors
in the last two decades using different powder feedstocks. However, limited research was …

This investigation deals with the study of 1 wt% carbon nanotube (CNT) reinforced high
velocity oxy-fuel sprayed conventional and nanostructured WC-Co coatings deposited on Ti …

The microstructural and wear characterization of carbon nanotubes (CNTs) reinforced WC-
20 wt.% Co coatings were performed. The coatings were deposited by high velocity oxy-fuel …

Thermally sprayed coatings are widely used to improve surface hardness and wear
resistance of components. However, surface roughness of the as-sprayed coatings is higher …

Plasma spray was used to deposit copper oxide (CuO) coating for gas sensing and catalytic
conversion applications. Amongst tin oxide (SnO 2), tungsten oxide (WO 3) and copper …

This investigation deals with a carbon monoxide (CO) sensing of copper oxide (CuO)
coating obtained using plasma spraying of CuO powder. CO sensing measurements were …

Ceramic coatings of alumina, titania, chromia, alumina-13 wt% titania and zirconia powder
were deposited on steel substrate using atmospheric plasma spraying technique. The …

The compatibility of cladding material with lead-bismuth eutectic (LBE) above 600° C poses
a critical challenge in the implementation of lead-bismuth fast-cooled stacks. Consequently …

Thermally sprayed molybdenum coatings have widespread applications in automotive,
aerospace, paper and plastics processing industries owing to their high scuffing resistance …

This paper attempts to understand ethanol and acetone sensing behavior of atmospheric
plasma sprayed copper oxide coating. Gas responses toward 300 ppm ethanol (~ 844%) …