Unique combination of thermal and mechanical properties exhibited by silicon carbide (SiC)
and aluminum nitride (AlN) earned their applications in electronics, automotives, defense …

The monotonic and high‐frequency (100 Hz) fatigue behavior of two Nicalon‐fabric‐
reinforced SiCON matrix composites was investigated at room temperature. The matrix …

The fatigue behavior of 2D needled C/SiC CMCs at room temperature was studied. The
residual tensile properties were determined for the run-out condition set for the fatigue …

The fatigue behaviors of two SiC/[SiC+ Si 3 N 4] ceramic matrix composites (CMC) were
investigated at 1,300° C in laboratory air and in steam. Composites consisted of a crystalline …

A commercial polysilazane is used as a silicon carbonitride matrix precursor for the
manufacture of ceramic matrix composites using bi-directional SiC Nicalon fabrics as …

The degradation of mechanical properties of a SiC fiber reinforced SiNC ceramic matrix
composite due to thermal shock by water quenching have been investigated. Post thermal …

This paper reports the ability to use a commercial polysilazane as matrix precursor for the
manufacture of ceramic matrix composites. By pyrolysis under nitrogen in the temperature …

A low temperature process for the manufacture of non-oxide monolithic ceramic bodies is
presented. This process is based on the pyrolysis at temperatures between 1000 and 1400° …

Three-dimensional Tyranno fiber reinforced SiC composites were fabricated by repetitive
infiltration of molten polycarbosilane into 3-dimensional textile preforms(volume fraction 35 …

In this chapter we describe some of the important processing techniques for fabricating
ceramic matrix composites. Among the items that one should take into account for choosing …