The present work is an effort to culminate the status, the scopes and the challenges in the
development of ferrous metal matrix composites (FMMCs). The FMMCs are older but …

In this paper, a new route is introduced to fabricate parts with increased wear and impact
resistance for use in tunneling and mining applications. A combination of selective laser …

This work studies the tribological behavior of the 316L austenitic stainless steels alloyed
with boron produced by conventional powder metallurgy process. Boron effect was …

Fatigue and fracture mechanisms have been studied in a steel-based metal matrix
composite (MMC), comprising a 316L austenitic matrix reinforced with 25wt.% particulate …

In this paper, Al 2 O 3 reinforced SS316L matrix composites were fabricated by powder
metallurgy technique. The high energy ball milling effect of the Al 2 O 3 with varying …

The present study examines the cyclic oxidation behaviour at 900° C in air of sintered 316L
austenitic stainless steels containing 1 wt.% yttria or 0.6 wt.% boron. The microstructures of …

The AISI316L stainless steel composites reinforced with 2, 4, 6, and 8 vol% titanium diboride
(TiB 2) particles were sintered by the high pressure-high temperature method. Ball-on-disk …

The mechanical and tribological properties of sintered 316L stainless steel composites with
TiB2submicroparticles were investigated. The composites were manufactured by Spark …

The bonding of Si3N4 ceramics with Ag–Cu–Ti, Ni and Ti was performed. The influencing
factors on joint strength were investigated. Cu–Ni–Ti intermetallic particles formed in situ …

WC–Co hardmetals are widely used in the cutting industry. Due to several disadvantages of
Co binder, many research studies have been carried out to find the suitable binders to …