Recent advances in mechanical properties of biopolymer composites: a review
In recent years, biopolymers are getting wide attention with the perspective of developing
high‐performance biocomposites with low environmental impact owing to their unique and …
high‐performance biocomposites with low environmental impact owing to their unique and …
[HTML][HTML] The opportunities and challenges of hybrid composite driveshafts and their couplings in the aerospace industry: a review
This article will analyse and discuss the ongoing research into the bonding of composite and
metallic materials and their application in hybrid material driveshafts for the aerospace …
metallic materials and their application in hybrid material driveshafts for the aerospace …
Finite element modeling of impact, damage evolution and penetration of thick-section composites
BA Gama, JW Gillespie Jr - International Journal of Impact Engineering, 2011 - Elsevier
Impact, damage evolution and penetration of thick-section composites are investigated
using explicit finite element (FE) analysis. A full 3D FE model of impact on thick-section …
using explicit finite element (FE) analysis. A full 3D FE model of impact on thick-section …
In-plane and through-thickness properties, failure modes, damage and delamination in 3D woven carbon fibre composites subjected to impact loading
Two noncrimp 3D woven carbon fibre composites (through thickness angle interlock) of
binder volume fractions 3% and 6% were characterised for their response to applied …
binder volume fractions 3% and 6% were characterised for their response to applied …
[HTML][HTML] Testing and modeling of Nomex™ honeycomb sandwich Panels with bolt insert
Nomex™ honeycomb core sandwich panels with a bolt insert were load tested and
modeled. The objective was to predict the honeycomb local buckling load and to identify a …
modeled. The objective was to predict the honeycomb local buckling load and to identify a …
[HTML][HTML] The influence of temperature gradient thermal shock cycles on the interlaminar shear strength of fibre metal laminate composite determined by the short beam …
A Kubit, T Trzepiecinski, M Kłonica, M Hebda… - Composites Part B …, 2019 - Elsevier
The paper presents research on the interlayer adhesion of fibre metal laminate composites
in a 3/2 configuration made of 0.4 mm thick 2024-T3 ALCLAD aluminium sheets. A polymer …
in a 3/2 configuration made of 0.4 mm thick 2024-T3 ALCLAD aluminium sheets. A polymer …
[HTML][HTML] A DIC-based study of in-plane mechanical response and fracture of orthotropic carbon fiber reinforced composite
The in-plane elastic properties and quasi-static fracture response of an orthotropically
woven carbon fiber reinforced composite are investigated using 3D digital image correlation …
woven carbon fiber reinforced composite are investigated using 3D digital image correlation …
Ballistic impact performance of composite targets
Ballistic impact performance of structures made of polymer matrix composites is presented.
During the ballistic impact event, the energy lost by the projectile is absorbed by the …
During the ballistic impact event, the energy lost by the projectile is absorbed by the …
Measuring the effect of strain rate on deformation and damage in fibre-reinforced composites: A review
JI Perry, SM Walley - Journal of Dynamic Behavior of Materials, 2022 - Springer
This review aims to assess publications relevant to understanding the rate-dependent
dynamic behaviour of glass-and carbon-fibre reinforced polymer composites (FRPs). FRPs …
dynamic behaviour of glass-and carbon-fibre reinforced polymer composites (FRPs). FRPs …
Experimental characterization and constitutive modeling of the non-linear stress–strain behavior of unidirectional carbon–epoxy under high strain rate loading
The mechanical response of IM7-8552 carbon epoxy was investigated for transverse tension
and transverse tension/in-plane shear loadings at static and dynamic strain rates using …
and transverse tension/in-plane shear loadings at static and dynamic strain rates using …