[HTML][HTML] Hard coatings for cutting applications: Physical vs. chemical vapor deposition and future challenges for the coatings community
Since decades, protective hard coatings with thicknesses of a few micrometers are grown by
physical or chemical vapor deposition (PVD, CVD) on cutting tools to improve their …
physical or chemical vapor deposition (PVD, CVD) on cutting tools to improve their …
Single layer and multilayer wear resistant coatings of (Ti, Al) N: a review
S PalDey, SC Deevi - Materials Science and Engineering: A, 2003 - Elsevier
We review the status of (Ti, Al) N based coatings obtained by various physical vapor
deposition (PVD) techniques and compare their properties. PVD techniques based on …
deposition (PVD) techniques and compare their properties. PVD techniques based on …
Hybrid HIPIMS and DC magnetron sputtering deposition of TiN coatings: Deposition rate, structure and tribological properties
Q Luo, S Yang, KE Cooke - Surface and Coatings Technology, 2013 - Elsevier
High power impulse magnetron sputtering (HIPIMS) has the advantage of ultra-dense
plasma deposition environment although the resultant deposition rate is significantly low. By …
plasma deposition environment although the resultant deposition rate is significantly low. By …
Effect of heat treatment and TiN coating on AISI O1 cold work tool steel
The effect of heat treatment and TiN coating on AISI O1 cold work tool steel was
investigated. Microstructural and phase analysis was done using optical microscope and X …
investigated. Microstructural and phase analysis was done using optical microscope and X …
Nanostructured TiN coating prepared by reactive plasma spraying in atmosphere
L Xiao, D Yan, J He, L Zhu, Y Dong, J Zhang… - Applied Surface Science, 2007 - Elsevier
In the present study, the nanostructured TiN coatings are obtained by means of reactive
plasma spraying in the air. The XRD analysis shows the coating was mainly composed of …
plasma spraying in the air. The XRD analysis shows the coating was mainly composed of …
Improvement of mechanical and tribological properties in steel surfaces by using titanium–aluminum/titanium–aluminum nitride multilayered system
Improvement of mechanical and tribological properties on AISI D3 steel surfaces coated with
[Ti–Al/Ti–Al–N] n multilayer systems deposited in various bilayer periods (Λ) via magnetron …
[Ti–Al/Ti–Al–N] n multilayer systems deposited in various bilayer periods (Λ) via magnetron …
Mechanical properties of Cr-ON coatings deposited by cathodic arc evaporation
B Warcholinski, A Gilewicz, AS Kuprin, GN Tolmachova… - Vacuum, 2018 - Elsevier
Ternary chromium based coatings (Cr-ON) were formed on HS6-5-2 steel substrates using a
vacuum arc plasma flux coating system at different relative oxygen concentrations, O 2 (x) …
vacuum arc plasma flux coating system at different relative oxygen concentrations, O 2 (x) …
Influence of preliminary metal-ion etching on the topography and mechanical behavior of TiAlN coatings on cemented carbides
Metal-ion etching is widely used in substrate surface modification before coating by physical
vapor deposition. In this work, TiAlN coatings were synthesized onto cemented carbides with …
vapor deposition. In this work, TiAlN coatings were synthesized onto cemented carbides with …
Cutting edge preparation of micro end mills by PVD-etching technology
CP Jäckel, AL Meijer, D Stangier, NF Lopes Dias… - Production …, 2024 - Springer
Micromilling tools face significant challenges in achieving cutting edge preparation by
mechanical processes due to their small size. To address these limitations, a new approach …
mechanical processes due to their small size. To address these limitations, a new approach …
Effect of ion bombardment and micro-blasting on the wear resistance properties of hard TiN coatings
R Mundotia, DC Kothari, A Kale, U Mhatre… - Materials Today …, 2020 - Elsevier
Ion bombardment (IB) is conventionally used as a pre-coating treatment process to increase
surface energy of tools to improve the adhesion of coatings produced using cathodic arc …
surface energy of tools to improve the adhesion of coatings produced using cathodic arc …