In the general environment of lightweight automobiles, the integrated die-casting technology
proposed by Tesla has become the general mode to better achieve weight reduction in …

For M50 bearing steel, which is widely used in aerospace engine main bearings, fretting
wear is an important but neglected category of wear failure during engine cold startup. High …

Abstract Mn-Ni-Mo steels used in reactor pressure vessel manufacturing often exhibit
martensite-austenite (M/A) islands post-quenching. These islands demonstrate the …

In this research, a new type of spring steel with ultra-high strength and toughness was
designed, and its mechanical properties and microstructure under different heat treatment …

The fracture of the disc cutting ring significantly impedes the efficiency of TBM. This
phenomenon is particularly obvious in geological conditions with high impact loads, such as …

Abstract Two kinds of Cr-Mo-V hot work tool steels with different nitrogen contents, ie High-N
steel and Low-N steel, were heat treated to investigate phase transformation phenomena in …

The reactor pressure vessel (RPV) in nuclear power plants is mainly made from Mn-Ni-Mo
steel. After quenching, this steel's microstructure features martensite-austenite (MA) islands …

Abstract Martensite-austenite (M/A) islands are typical in the quenched microstructure of Mn-
Ni-Mo steel, frequently utilized for fabricating reactor pressure vessels (RPV). These islands …

Thermomechanical processing (TMP) of ferritic–martensitic (FM) steels, such as HT9 (Fe–
12Cr–1MoWV) steels, involves normalizing, quenching, and tempering to create a …

This Special Issue provides readers with up-to-date information on the recent progress in the
structure transition, processing, characterization, and applications of metals, including …