This study aims to synthesize and characterize lignin-decorated zinc oxide nanoparticles
before incorporating them into resin-modified glass ionomer cement (RMGIC) to improve …

In this work, solidification and T6-heat treatment experiments were performed with the
Al7Si0. 3Mg alloy in order to investigate the effect of processes parameters on the …

Horizontal directional solidification and precipitation hardening experiments were performed
with the Al5. 5Si3Cu alloy. Solidification thermal and microstructural parameters such as …

In this investigation, in order to evaluate the influence of microstructures on the
microhardness of an aluminum-based multicomponent alloy, samples of the horizontally …

As-cast samples of the Al–3wt.% Ni–1wt.% Bi alloy resulting from the horizontal directional
solidification process were subjected to the micro-abrasive wear test. The effects of the …

To investigate dry wear behavior in an aluminum-based automotive alloy, transient
horizontal solidification experiments using a water-cooled directional solidification device …

A transient horizontal solidification experiment was performed to investigate the role of the
thermal parameters, such as growth and cooling rates (GR and CR, respectively), on the …

Unsteady-state upward solidification experiment was carried out with the Al-3Cu-3Ni (wt.%)
alloy. Temperature profiles were obtained through a water-cooled directional solidification …

Este artigo apresenta um estudo teórico-experimental com o objetivo de determinar o
coeficiente de transferência de calor interfacial, as variáveis térmicas de solidificação, os …

Aluminum and its alloys, compared to steel, have a higher strength/weight ratio, good
electrical and thermal conductivity, and better corrosion resistance. Among the various …