Run-of-mine ore is usually too large to be useful for construction or metallurgy. Large
particles must be reduced to specific sizes to either comply with aggregate sizing …

There are a sufficient number of works devoted to modeling crushing machines.
Nevertheless, the fact that there are a large number of working conditions, and the ongoing …

The production rate of an ore crushing circuit depends on the amount of equipment in
operation. If the amount of active equipment is less than the optimum level, the reduced ore …

The availability of river sand is gradually decreasing, and it is an inevitable trend for
manufactured sand to replace river sand as a sustainable resource. However, the current …

This paper reports the calibration and validation of a cone crusher model using industrial
data. Usually, there are three calibration parameters in the condensed breakage function; by …

Over the last few decades, the demand for energy-efficient mineral-processing methods has
continued. The necessity to develop energy-efficient technologies for the mineral industry …

This study aims to analyze the impact of key structural parameters such as the bottom angle
of the mantle, the length of the parallel zone, and the eccentric angle on the productivity and …

This study aims to investigate the effect of the shredding machine used on the recyclability of
plastic fractions after primary crushing. This work presents a method for producing …

The design of complex technological processes control systems involves several stages.
One of the first is to analyze the steady-state operation modes of the control plant. Ore …

Comminution equipment, which includes crushing and grinding machinery, is a significant
contributor to the operational costs of mineral processing plants. Choke feeding is reported …