Relationship between spacing of eutectic colonies and tensile properties of transient directionally solidified Al-Ni eutectic alloy
Abstract Eutectic Al-Ni alloys are widely faced as materials to be considered for advanced
structural components. Nevertheless, still there is a lack of research on microstructural …
structural components. Nevertheless, still there is a lack of research on microstructural …
Thermal and Electrical Conductivity of Aluminum Alloys: fundamentals, structure-property relationships, and pathways to enhance conductivity
This critical review examines past and current studies to enhance conductivity properties of
aluminum (Al) alloys. Fundamental principles governing metallic alloys' electrical and …
aluminum (Al) alloys. Fundamental principles governing metallic alloys' electrical and …
From irregular to regular eutectic growth in the Al-Al3Ni system: In situ observations during directional solidification
We investigate the irregular eutectic growth dynamics of the Al-Al 3 Ni alloy, in which one of
the solid phases (Al 3 Ni) grows faceted from the liquid. Leveraging in situ optical …
the solid phases (Al 3 Ni) grows faceted from the liquid. Leveraging in situ optical …
The correlation between dendritic microstructure and mechanical properties of directionally solidified hypoeutectic Al-Ni alloys
Al-Ni hypoeutectic alloys were directionally solidified under upward transient heat flow
conditions. The aim of the present study is to set up correlations between the as-cast …
conditions. The aim of the present study is to set up correlations between the as-cast …
Development of a nanostructure microstructure in the Al–Ni system using the electrospark deposition process
Electrospark deposition (ESD) was applied to produce aluminum–nickel coatings consisting
of nanostructured Al and Al3Ni phases. An ESD electrode was manufactured from a hypo …
of nanostructured Al and Al3Ni phases. An ESD electrode was manufactured from a hypo …
Microstructural development in Al-Ni alloys directionally solidified under unsteady-state conditions
Abstract Three Al-Ni hypoeutectic alloys were directionally solidified under upward unsteady-
state heat-flow conditions. Primary (λ 1) and secondary (λ 2) dendrite arm spacings were …
state heat-flow conditions. Primary (λ 1) and secondary (λ 2) dendrite arm spacings were …
Thermal analysis during solidification of an Al–Cu eutectic alloy: interrelation of thermal parameters, microstructure and hardness
Eutectic alloys are considered promising candidates for high-temperature structural
applications. In spite of this, quantitative examination of the effect of the length scale of the …
applications. In spite of this, quantitative examination of the effect of the length scale of the …
Slow and rapid cooling of Al–Cu–Si ultrafine eutectic composites: Interplay of cooling rate and microstructure in mechanical properties
Ternary Al–15 wt% Cu–7 wt% Si and Al–22 wt% Cu–7 wt% Si alloy specimens were
generated by transient directional solidification (DS) and rapid solidification (RS) …
generated by transient directional solidification (DS) and rapid solidification (RS) …
3D morphology and growth mechanism of primary Al3Ni in directionally solidified Al-16 wt% Ni alloy
N Zhang, W Lu, Z Ding, Q Hu, J Li - Journal of Alloys and Compounds, 2023 - Elsevier
The growth pattern and three-dimensional (3D) morphology of primary Al 3 Ni in
directionally solidified Al-16 wt% Ni at different pulling rates were quantitatively and …
directionally solidified Al-16 wt% Ni at different pulling rates were quantitatively and …
Solidification microstructure selection in the Al-rich Al–La, Al–Ce and Al–Nd systems
A Hawksworth, WM Rainforth, H Jones - Journal of crystal growth, 1999 - Elsevier
The effect on solidification and microstructure of solidification conditions in wedge chill
casting and Bridgman growth have been investigated for Al 5.7 to 19wt% X (X= La, Ce, or …
casting and Bridgman growth have been investigated for Al 5.7 to 19wt% X (X= La, Ce, or …