Additive manufacturing (AM) is a cutting-edge technique that builds parts by adding layers
from a digital design and depositing materials selectively where required. AM is vital in …

The present study investigates the formation mechanism of L1 2 nano-precipitates within the
FCC phase during the solidification process of the AlCoCrFeNi 2.1 eutectic high entropy …

Many applications with potential use of high entropy alloys (HEAs) involve thermo-
mechanical processing. The principal aim of this study is to elucidate the deformation …

The present study aims to investigate the effect of friction stir processing (FSP) on the
microstructural evolutions and mechanical properties of a nonequiatomic interstitial high …

Stainless-steel, particularly the 316L alloy, is extensively utilized across diverse industrial
sectors. Nonetheless, its inherent limitation of low yield strength poses a significant …

Abstract AlCoCrFeNi 2.1 eutectic high-entropy alloy has good fatigue properties. However,
its application in engineering is hindered by as-cast defects. To solve this problem, vacuum …

During traffic accidents, automobiles often experience rapid deformation at high strain rates
spanning from 10² to 10³ s⁻ ¹. The dynamic deformation behavior and the constitutive model …

A balance between the mechanical performance and castability of Ni-based single crystal
superalloys is expected to be achieved by doping with appropriate carbon content. In this …

To explore the optimal hot ductility regimes of a low-carbon bearing duplex stainless steel,
we conducted tensile tests using a Gleeble 3500 simulator within a temperature range …

In this work, the effects of strain rate on dynamic hot deformation behavior and
microstructure evolution of Fe-Mn-Cr-N steel were studied under quasi-static and dynamic …