Consolidation/synthesis of materials by electric current activated/assisted sintering
This review article aims to provide an updated and comprehensive description of the
development of the Electric Current Activated/assisted Sintering technique (ECAS) for the …
development of the Electric Current Activated/assisted Sintering technique (ECAS) for the …
Deformation and strengthening mechanisms of a carbon nanotube reinforced aluminum composite
The objective of this study was to characterize microstructure, texture, and deformation
behavior of a carbon nanotube (CNT) reinforced aluminum composite via electron …
behavior of a carbon nanotube (CNT) reinforced aluminum composite via electron …
Effect of stress-relief annealing on rolled texture of nickel-based alloys
Y Ji, H Suo, J Liu, L Ma, M Liu, K Shaheen… - Journal of Alloys and …, 2022 - Elsevier
In this study, the effects of stress-relief annealing (SRA) on the rolled texture of nickel-based
alloys were extensively analysed. Biaxially textured Ni–W alloy substrates with strong cube …
alloys were extensively analysed. Biaxially textured Ni–W alloy substrates with strong cube …
Three-dimensional processing maps and microstructural evolution of a CNT-reinforced Al-Cu-Mg nanocomposite
The determination of the optimum processing window of a material at elevated temperatures
is essential for metal forming. Such an “ideal” processing window could be characterized by …
is essential for metal forming. Such an “ideal” processing window could be characterized by …
Strong cube texture of super-high tungsten Ni–W alloy substrates used in REBCO coated conductors
Y Ji, H Suo, ZL Zhang, L Ma, X Wu, C Zhang, J Li… - Journal of Alloys and …, 2020 - Elsevier
Biaxially textured super-high tungsten Ni–W alloy substrates have been fabricated through
the composite substrate method in view of coated conductor applications. The tungsten …
the composite substrate method in view of coated conductor applications. The tungsten …
Fabrication of in situ Ni (W)–WC nano composites via mechanical alloying and spark plasma sintering
Microstructural and mechanical properties of spark plasma sintered Ni-30wt% W powders
fabricated via mechanical alloying (MA) for 48h were reported in the present study. Due to …
fabricated via mechanical alloying (MA) for 48h were reported in the present study. Due to …
Magnetization of TiC–10TiN–xMC–yNi (MC= Mo2C, WC) cermets
Q Yang, W Xiong, S Zhou, M Zhang, B Huang, S Chen - Materials & Design, 2017 - Elsevier
Abstract Magnetization of TiC–10TiN–xMC–yNi (MC= Mo 2 C, WC, x= 0, 2, 4, 6, 8 mol%, and
y= 20, 40 mol%) cermets was investigated. Room-temperature (RT) saturation …
y= 20, 40 mol%) cermets was investigated. Room-temperature (RT) saturation …
Possible mechanisms of cubic texture generation in heavily rolling face-centered cubic metal due to the annealing twining
Y Ji, H Suo, L Wang, Z Zhang - Materials Science and Engineering: A, 2024 - Elsevier
Face-centered cubic (FCC) metals were subjected to heavy rolling and two-step
recrystallization annealing to form sharp cubic textures. The traditional theory states that the …
recrystallization annealing to form sharp cubic textures. The traditional theory states that the …
Study on the formation of cubic texture in Ni–7 at.% W alloy substrates by powder metallurgy routes
One of the main challenges for coated conductor applications is to produce sharp cubic
textured alloy substrates with high strength and low magnetism. In this work, the cubic …
textured alloy substrates with high strength and low magnetism. In this work, the cubic …
Characterization and properties of an advanced composite substrate for YBCO-coated conductors
Thin, biaxially textured Ni5W/Ni12W/Ni5W composite substrates for coated conductor
applications have been fabricated. The particularity of this three-layer composite …
applications have been fabricated. The particularity of this three-layer composite …