The current status of field assisted sintering technology (FAST) of structural metals from
powder is critically reviewed. Recently, there have been significant increases in the uptake …

Although the parts produced by selective laser melting (SLM) are reported to possess
comparable or better mechanical properties than the traditionally processed counterparts …

Electrochemical measurements and microstructural studies were carried out to investigate
the corrosion behaviour of the different planes for the Al-12Si alloy produced by selective …

This work demonstrated the feasibility of producing partially stabilized zirconia (PSZ)-
reinforced AISI H13 steel composites through mechanical milling (MM) and selective laser …

A composite with a high-alloy steel matrix was reinforced with varying amounts of Mg-PSZ
and synthesized using Spark Plasma Sintering (SPS) technology. To prepare the powders …

Fe-Al 2 O 3 nanocomposites with Al 2 O 3 nanoparticles uniformly dispersed have been
successfully prepared via a versatile facile and scalable combustion-based route with two …

采用传统粉末冶金工艺制备了陶瓷颗粒增强Fe‒0.5 Mo‒1.75 Ni‒1.5 Cu‒0.7 C
扩散合金化钢复合材料, 选用的陶瓷颗粒为SiC, TiC 和TiB 2. 采用光学显微镜和扫描电子显微镜 …

Abstract Hypereutectic Al-20Si alloy is widely used in automotive, aerospace, and other
fields because of its lightweight, high thermal conductivity, good wear, and corrosion …

The mechanical properties and tempering resistance of a powder metallurgical (PM) tool
steel (AISI H13) reinforced with partially stabilized zirconia (PSZ) were investigated. The …

Combining stainless steel with zirconia components by powder technological shaping
routes for manufacturing of multifunctional parts is an advantageous and promising one-step …