A recurring obstacle encountered during welding which dictates the weld quality is the
management of input process restrictions. Thorough selection of input welding restrictions is …

The severe strength loss of hybrid welded Al-Zn-Mg-Cu alloy joints such as 7075-T6 has
been characterized using high-resolution synchrotron radiation X-rays and theoretical …

AA2219 aluminium alloy square butt joints without filler metal addition were fabricated using
gas tungsten arc welding (GTAW), electron beam welding (EBW) and friction stir welding …

In this work the evolution of the residual stresses in a MIG-welded 2024-T3 aluminium alloy
M (T) specimen during in situ fatigue crack growth at constant load amplitude has been …

In this paper, numerical analyses of fatigue crack growth in integral skin-stringer panel
produced by means of laser beam welding (LBW) are presented along with fatigue results …

Fatigue life of integral skin-stringer panels produced by laser beam welding (LBW) is
analyzed. This type of panel is used in airframe construction where fatigue and damage …

In this research the metal inert gas (MIG) welding was applied on 8.6 mm thick 6082-T6
aluminum alloy. It was found that the hardness of the 6082 high-strength aluminum alloy …

The effect of periodic overloads on crack initiation, growth rate, and fatigue life, within a
notch stress field representative of a turbine blade root fixing, has been investigated. Bend …

The microstructural features of variable polarity plasma arc welded Al–Cu–Mg 2024-T351
with 2319 filler have been studied by TEM, SEM and DSC. Fusion zone, partial melting …

The micro-structure and residual stresses of VPPA welds at varying welding positions still
lack systematic research. To clarify the effects of gravity on Al weld performance, 7 welding …