In this paper, an overview on the used fuels in Moderate or Intense Low-oxygen Dilution
(MILD) combustion is provided including gaseous, liquid, and solid fuels in addition to fuel …

This article presents the design and development of a can-type gas turbine combustor
operating in flameless combustion mode with liquid fuels. The combustor operates with …

Due to simple structure and good atomization performance, pressure swirl nozzles are
favored in aero-engine, agriculture, and numerous industrial combustion applications. Spray …

The droplet evaporation and autoignition behaviour of a three-component kerosene
surrogate is numerically investigated for a wide range of ambient pressures and …

This paper presents investigations with asymmetric liquid fuel injection (kerosene and
biodiesel) into a combustor operating in MILD (moderate or intense low oxygen dilution) …

Abstract The Eddy Dissipation Concept (EDC) combustion model, in comparison with some
other combustion models, has drawn attention, especially for the Moderate or Intense low …

Atomization and efficient evaporation at extremely small flow rates is an additional challenge
for liquid fueled small-scale combustor and burner applications. In the present study …

Distributed combustion, often associated with the low-oxygen condition, offers ultra-low NO x
emission. However, it was recently achieved without combustion air dilution or internal flue …

A novel combustor design assisted with increased hot air jet momentum is used to enhance
the internal recirculation. Geometric modifications are incorporated in terms of altered air …

The dependence of NO emissions on the equivalence ratio (Φ) is a classic problem in
combustion science. In many combustion textbooks, as Φ increases from 0.5 to 1.0, the NO …