Originating from the early 1970s in Luleå, Sweden, and initially designed for the agricultural
industry, hot-stamped sheet steel has developed to become the leading material in a …

As a promising solution to the growing demand for lightweighting, hot stamping has gained
considerable applications in the automotive industry. Over the past few decades, the market …

Boron steel is the most widely used material in hot stamping applications for forming
automotive body panels with complex shapes and ultra-high strength. Due to the high …

Abstract The austenite formation in 0.2% C and 0.45% C steels with the initial microstructure
of ferrite and pearlite has been studied. The effect of conventional (10° C/s), fast (50° C/s …

The high-temperature deformation behavior of 5Cr21Mn9Ni4N heat-resistant steel was
studied using a Gleeble-1500D thermal simulation test machine for high-temperature …

For the purpose of manufacturing the automotive body structure parts with tailored
properties, the hot stamping process with partial heating was experimentally and …

This work focuses on the effect of soaking time on the microstructure during ultrafast heat
treatment of a 50% cold rolled low carbon steel with initial ferritic-pearlitic microstructure …

Background A significant amount of uniaxial tensile tests has been carried out using Gleeble
systems to investigate the viscoplastic deformation of boron steel (22MnB5) under hot …

In order to reduce CO 2 emissions in the transport sector, the approach of load-adapted
components is increasingly being pursued. For the design of such components, it is crucial …

A physically-based material model has been developed to describe the austenite formation
in a manganese-boron steel during heating in hot stamping processes. The equations were …