High strength–ductility synergy is difficult to achieve in Mg alloys. Although high strength has
been achieved through considerable alloying addition and low-temperature extrusion, these …

Automobiles are the inevitable mode of transportation. However, increasing fuel prices and
carbon dioxide emissions are posing a serious threat to automobile users and the …

In this study, the multi-pass equal channel angular pressing (ECAP) was employed on a
high-calcium-content Mg-Al-Ca-Mn alloy to tailor its microstructure and mechanical …

Herein, uniaxial compression experiments, with a series of true strains at different
temperatures (573–673 K) and strain rates (3× 10− 3-3× 10− 1 s− 1), are conducted on AZ31 …

Abstract As-cast Mg-Al-Ca alloys are among the most promising alloys for elevated
temperature applications (≤ 200° C) due to their superior creep properties when compared …

Friction stir processing (FSP) of as-cast Mg-7Al, Mg-4Al-3Ca (AX43), and Mg-2Al-5Ca
(AX25) magnesium alloys led to the remarkable grain refinement and enhancement of …

A comparative study on the microstructural evolutions and mechanical properties of as-cast
and as-homogenized Mg-3.5 Al-4.5 Ca-0.4 Mn (wt.%) alloys with different Mg 2 Ca …

The room temperature plasticity of the cubic C15 CaAl 2 Laves phase was investigated
using nanomechanical testing and electron microscopy. The correlation between slip traces …

In the present investigation, the microstructure and phase evolution, and their implications
on the mechanical properties for different Ca/Al ratios (within~ 0.06–2.21, wt.%) in lean as …

Abstract The Mg-Al-Ca system has been shown to be a promising alloy system since it
combines the low density of Mg with a high creep resistance at high alloying contents and a …