Milled carbon fibres are a short form of carbon fibre, typically∼ 100 µm in length, used as a
reinforcing material in the composites industry. The applications for milled fibre including …

The problem associated with mixtures of fillers and polymers is that they result in mechanical
degradation of the material (polymer) as the filler content increases. This problem will …

For the first time, an innovative combed technique was used for the successful preparation of
untreated kenaf fibre. Subsequent to investigations, the combed strategy, provided a smooth …

In this study, an effective method has been described and adopted to quantify the diameter
and length of graphene nanofiller. The experimentally measured graphene parameters were …

To date, the mechanical performance of kenaf composites is still unsatisfied in term of its
mechanical performance. Therefore, research focuses on kenaf composites fabrication …

In this study, the milled carbon fibre (MCF), multi-walled carbon nanotubes (MWCNT),
synthetic graphite (SG) and polypropylene (PP) were fabricated using the compression …

Bipolar plates (BPs) are one of the primary components that taking responsibility for multi‐
functions of vital importance to the long‐term performance of proton exchange membrane …

Polymer composites have been extensively fabricated given that they are well-fitted for a
variety of applications, especially concerning their mechanical properties. However …

Die configurations, filler orientations, electrical conductivity, and mechanical properties of
polypropylene reinforced milled carbon fibers were studied as functions of their …

In order to study the electrical conductivity of anisotropic PMMA/carbon fiber (CF)
composites, cylindrical PMMA/CF filaments were extruded through a capillary rheometer …