Magnesium is one of the largely available elements in the earth's crust. It has a low structural
density with high specific strength. This unique material property has forced an increase in …

Magnesium (Mg) alloys have received a significant interest in the past 20 years, owing to a
nonlinearly increasing demand for lightweight structural materials. Magnesium extrusions …

Magnesium, the lightest structural metal, is approximately four times lighter than steel—the
most widely used metal in industrial applications. Currently available Mg alloys, however …

FeCrAl alloys have been developed as one of the promising candidates of accident tolerant
fuel (ATF) cladding materials for light water reactor (LWR) to replace zirconium-based alloys …

Abstract Introducing {10 1¯ 2}< 10 1¯ 1> extension twin and their variants in magnesium
alloys is one of the cost-effective practical approaches for re-assigning the crystallographic …

Abstract The Mg-6 mass% Zn alloys microalloyed with different amounts of Ca were cast and
extruded. The second phase in the as-cast Mg-6Zn alloy is Mg 4 Zn 7, which is replaced by …

The present work mainly focuses on the effect of minor content of Gd element on the
microstructure and mechanical properties of Mg-Zn alloy. The Mg-4Zn-xGd (x= 0, 0.5, 1, 2) …

Enhancing corrosion resistance of Mg-Zn alloys with high strength and low cost was critical
for broadening their large-scale practical applications. Here we prepared solutionized, peak …

The effects of Ce additions on the microstructures, mechanical properties and thermal
conductivity of low-temperature extruded Mg-0.9 Mn (wt%) alloy were systematically …

Abstract The Mg–Ca alloys with 2 wt%, 3 wt%, 5 wt% Al content were fabricated in this
paper. After be extruded at 673 K with the ratio of 16: 1, the microstructures and mechanical …