Dynamic transformation was first predicted by Gegel and Nadiv during hot deformation of a
Ti-6Al-2Sn-4Zr-2Mo alloy. Later it was observed in near alpha and two-phase titanium …

A new biomaterial Ti–14Cr alloy was designed for biomedical applications. The
manufacturing process of Ti alloys through hot deformation is crucial for controlling the grain …

Hot compression tests of Ti-6Cr-5Mo-5V-4Al alloy were carried out under the temperature
range of 963–1113 K and strain rates of 0.001, 0.01, 0.1, 1 s− 1 on a Gleeble-3500 …

Limited by the composition, the service temperature of high-temperature titanium alloys have
been restricted to 600° C for many years. In this study, a self-designed Ti–6Al–3Sn–10Zr …

The role of dynamic transformation in flow stress during the deformation of two-phase
titanium alloys was evaluated using isothermal compression and self-consistent modeling …

The flow behavior and dynamic transformation of near β TC17 alloy with a bimodal structure
were investigated by hot compression with the high strain rate range from 1 s− 1 to 20 s− 1 …

Profound and comprehensive knowledge on hot deformation of metastable β titanium alloy
is essential to process optimization and microstructure control. In this work, the hot …

Electro-shocking treatment (EST) has been investigated as a pathway to optimise the
microstructure and mechanical properties of titanium alloys. The thermal conditions …

The flow behavior and interaction of microstructure evolution mechanisms for a near α Ti-0.3
Mo-0.8 Ni alloy with as-cast lamellar microstructure are investigated at temperatures of …

Studying the laser welding (LW) of three-dimensional printed materials is of important
significance for developing the composite manufacturing of large structures that combines …