A new type of alloy, modified based on 6005A alloy, with addition of 0.06% Sc was prepared
by ingot metallurgy. The alloy ingots were homogenized, extruded, quenched and solution …

Asymmetrical multiaxial fatigue tests were performed. A new quantification parameter is
proposed to represent the difference in velocity during ratcheting accumulation. Although the …

A 60Si2Mn steel fastening clip in the track of high-speed railway fractured abnormally during
service, and its service life was 8 years. The microstructure and the fracture morphology of …

In the present research, the fracture behavior of the AZ91 magnesium alloy is analyzed
based on the striations spacing on the fracture surface for predicting the fatigue High-Cycle …

In this dataset, experimental results of high-cycle bending fatigue testing on crankshaft
ductile cast irons were presented both in raw and analyzed data. For this objective, EN-GJS …

As a method of strengthening small-holes components, laser shock processing (LSP)
exhibits thickness effect and uncertainties in the strengthening effectiveness when applied to …

Multiaxial low cycle fatigue tests under non‐proportional stress (NPSS) controlled mode
were performed on commercial pure titanium (CP‐Ti). Strain responses of axial and …

The principles of the mechanisms for fatigue crack propagation in metals have been
established several decades ago. By definition, fatigue might be summarized as a damage …

The evaluation of the fatigue performance is a crucial subject in the research of structural
materials utilized in the field of aerospace engineering. In order to examine the influence of …

Die vorliegende Dissertation entstand während meiner Tätigkeit als wissenschaftliche
Mitarbeiterin der Arbeitsgruppe Werkstoffprüfung an der Technischen Universität …