To investigate mechanical behaviours of structural stainless steel (SS) 316L at cold-region
cooling environment, this paper firstly performed tension tests on SS 316L at varying low …

Deformation behavior was studied in cold-rolled 0.2 C-1.6 Al-6.1 Mn-Fe transformation-
induced plasticity (TRIP) steel subjected to intercritical annealing. The steel intercritically …

Pre-strain with large deformation is an effective method to improve the yield ratio of
metastable austenitic stainless steel, but it will lead to a significant reduction in elongation …

Laser similar welding of cast and rolled high-entropy alloys (HEAs) was performed using the
cantor system (Co 0.2 Cr 0.2 Fe 0.2 Mn 0.2 Ni 0.2). As the welding velocity was increased …

Ferrite and austenite duplex stainless steel with heterogeneous lamella structure was
fabricated by severe cold-rolling and short-time annealing. The processed steel exhibited …

A high-strength-ductility 304L stainless steel with heterogeneous lamella structure (HLS)
was fabricated by cold rolling and subsequent partial recrystallization. The HLS was …

This study investigates the effects of welding velocity on weldability of dissimilar cast/rolled
high-entropy alloys and the applicability of cryogenic temperatures. Cast HEA side of …

In this study, an austenitic stainless steel pipe for the transportation of liquefied natural gas
(LNG) was gas tungsten arc welded with a wall thickness of 15.1 mm. Low-temperature …

Austenitic stainless steel is useful for storing and transporting liquefied natural gas (LNG) at
temperatures below− 163° C due to its superior low-temperature applications. This study …

The 316LN stainless steel (SS) used for TF conduits in the ITER must undergo a series of
pre-deformation during the fabrication. In order to investigate the variation of mechanical …