[引用][C] Composite materials: science and engineering
KK Chawla - 2012 - books.google.com
This updated and enlarged third edition of a widely used text offers an integrated and
completely up-to-date coverage of composite materials. Focusing on the relationship …
completely up-to-date coverage of composite materials. Focusing on the relationship …
Graphene-and-copper artificial nacre fabricated by a preform impregnation process: bioinspired strategy for strengthening-toughening of metal matrix composite
Metals can be strengthened by adding hard reinforcements, but such strategy usually
compromises ductility and toughness. Natural nacre consists of hard and soft phases …
compromises ductility and toughness. Natural nacre consists of hard and soft phases …
Ultrahard carbon film from epitaxial two-layer graphene
Atomically thin graphene exhibits fascinating mechanical properties, although its hardness
and transverse stiffness are inferior to those of diamond. So far, there has been no practical …
and transverse stiffness are inferior to those of diamond. So far, there has been no practical …
Plastic deformation of metal/ceramic nanolayered composites
Metal/ceramic multilayers combine high hardness of the ceramic layer and the high ductility
of the metallic layer, enabling the design of novel composite coatings with high hardness …
of the metallic layer, enabling the design of novel composite coatings with high hardness …
Microstructure and deformation behavior of biocompatible TiO2 nanotubes on titanium substrate
Titanium oxide coatings have been shown to exhibit desirable properties as biocompatible
coatings. We report on the quantitative microstructure characterization and deformation …
coatings. We report on the quantitative microstructure characterization and deformation …
Recent advances in modeling of interfaces and mechanical behavior of multilayer metallic/ceramic composites
Since the introduction of the term “nanolaminate” in the mid-1990s, considerable research
activities on metallic/ceramic nanolaminates (MCN) have been conducted. Incorporating …
activities on metallic/ceramic nanolaminates (MCN) have been conducted. Incorporating …
Strong resistance to shear instability in multilayered metallic composites by nanoscale amorphous-BCC crystalline interfaces
F Qin, F Chen, J Hou, W Lu, S Chen, J Li - Materials Science and …, 2024 - Elsevier
Experiments have shown that high strength and high plastic stability are difficult to be
simultaneously obtained in crystalline-amorphous layered composites. Here we report a …
simultaneously obtained in crystalline-amorphous layered composites. Here we report a …
Compressive flow behavior of Al–TiN multilayers at nanometer scale layer thickness
D Bhattacharyya, NA Mara, P Dickerson, RG Hoagland… - Acta Materialia, 2011 - Elsevier
The mechanical behavior of nanoscale Al–TiN multilayered composites was studied using
micropillar compression experiments, which were compared with previously performed …
micropillar compression experiments, which were compared with previously performed …
Microstructure and mechanical properties of CoCrFeNiAl0. 5Ti0. 1 high entropy alloy rod
In this study, we investigated the microstructural features and mechanical behavior of a
forged CoCrFeNiAl 0.5 Ti 0.1 high-entropy alloy (HEA) rod with a 21 mm diameter. Analysis …
forged CoCrFeNiAl 0.5 Ti 0.1 high-entropy alloy (HEA) rod with a 21 mm diameter. Analysis …
In situ Nanoindentation Study of Plastic Co-deformation in Al-TiN Nanocomposites
We performed in situ indentation in a transmission electron microscope on Al-TiN multilayers
with individual layer thicknesses of 50 nm, 5 nm and 2.7 nm to explore the effect of length …
with individual layer thicknesses of 50 nm, 5 nm and 2.7 nm to explore the effect of length …