The present article focuses on the current status of research and development concerning
corrosion resistance of Fe-Cr-based amorphous alloys and gives suggestions for further …

Among various materials available for alleviating the corrosion-related degradation, thermal
sprayed Fe-based metallic glass coatings (MGCs) have received huge attention from the …

The correlation between the porosity defects, inevitably existed in thermally sprayed Fe-
based amorphous coating, and the long-term corrosion behaviour of the coated steels have …

Wear resistant highly amorphous Fe 60 Cr 8 Nb 8 B 24 (at.%) coatings of about 280 μm
thickness were prepared through high velocity oxygen fuel (HVOF) thermal spray process …

The FeCrAlTiNb high-entropy alloy coatings are fabricated by magnetron sputtering method
to prevent the lead-bismuth eutectic (LBE) corrosion of structural components used in lead …

The conflicting role of crystalline phase on the corrosion and wear resistance of the glass
former Fe 66 Cr 10 Nb 5 B 19 alloy was investigated. Amorphous to crystalline structures …

Developing Fe-based metallic glass (MG) composite coatings with exceptional
amalgamation of enhanced mechanical and corrosion properties have attracted wide …

In this work, the corrosion behavior of amorphous and partially crystallized Fe 68 Cr 8 Mo 4
Nb 4 B 16 alloys has been studied. Fully amorphous ribbons were prepared by melt …

Metallic glass (MG), a new type of multi-component alloy with unique disordered atomic
stacking structure, has gradually been recognized as a promising anticorrosive material for …

Abstract An Fe 48 Cr 15 Mo 14 C 15 B 6 Y 2 amorphous coating was fabricated using high-
velocity oxygen fuel (HVOF) technology. The obtained coating was annealed at 500° C and …