Numerical simulations have recently shown their potential as a robust, cheap and reliable
tool for predicting the quality of components produced by metal additive manufacturing …

One of the factors limiting the use of additive manufacturing, particularly powder bed
processes, is their low productivity. An approach to increasing laser powder bed fusion …

This work compares the mechanical and corrosion properties of 316L steel manufactured by
Laser Powder Bed Fusion (LPBF) and post treated by Hot Isostatic Pressing (HIP) to wrought …

In-situ co-axial meltpool monitoring has become a popular tool for digitising the laser
powder bed fusion (L-PBF) process, providing baseline data for certification. Each layer …

The influence of the process gas, laser scan speed, and sample thickness on the build-up of
residual stresses and porosity in Ti-6Al-4V produced by laser powder bed fusion was …

The generation of spatters during laser powder bed fusion (L-PBF) of Alloy 718 is known to
be detrimental for the re-use of the feedstock powder and the quality of the final product. In …

The metal powder used during the Laser Powder Bed Fusion (L-PBF) process is usually
cycled for reuse in subsequent build jobs for cost-effectiveness and sustainability …

In this work, a concept of using surface roughness data as an evaluation tool of the process
variation in a commercial Laser Powder Bed Fusion (L-PBF) machine is demonstrated. The …

Contour scanning and process gas type are process parameters typically considered
achieving second order effects compared to first order factors such as laser power and …

This work presents the effects of input processing parameters and strut thickness (in square
struts) on microstructure and properties in laser powder bed fusion additively manufactured …