Mechanical, thermal, and morphological studies of adding POSS reinforcement to the PA6/NBR composites
SH Abedi, M Ghorbanzadeh Ahangari… - Polymer-Plastics …, 2024 - Taylor & Francis
In this study, a hybrid nanocomposite made of the polyamide 6 (PA6) and nitrile butadiene
rubber (NBR) with polyhedral oligomeric silsesquioxanes (POSS) was prepared and …
rubber (NBR) with polyhedral oligomeric silsesquioxanes (POSS) was prepared and …
Study of morphology and mechanical properties of PP/EPDM/clay nanocomposites prepared using twin‐screw extruder and friction stir process
MR Nakhaei, A Mostafapour, C Dubois… - Polymer …, 2019 - Wiley Online Library
In this paper, PP/EPDM nanocomposites with 5 wt% nanoclay are fabricated by friction stir
processing (FSP) and compared to the results obtained via a conventional twin screw …
processing (FSP) and compared to the results obtained via a conventional twin screw …
Probing the Dynamic Structural Evolution of End-Functionalized Polybutadiene/Organo-Clay Nanocomposite Gels before and after Yielding by Nonlinear Rheology …
W Peng, C Feng, J Hou, R Zhang, P Sun, Y Gao… - Polymers, 2022 - mdpi.com
Understanding the structural evolution process after the yielding of networks in polymer
nanocomposites can provide significant insights into the design and fabrication of high …
nanocomposites can provide significant insights into the design and fabrication of high …
Rheological and crystallization properties of ABS/PA6-compatibilized blends via in situ reactive extrusion
D Zhao, D Yan, X Fu, N Zhang, G Yang - ACS omega, 2020 - ACS Publications
ABS/PA6-compatibilized blends were prepared by in situ reactive extrusion method. The
main objective was to evaluate the influences of the morphology and blend composition on …
main objective was to evaluate the influences of the morphology and blend composition on …
[PDF][PDF] The mechanical properties of PA6/NBR/clay/CaCO3 hybrid nanocomposites
A Haghshenas, H Shahrajabian - Journal of Modern Processes in …, 2021 - journals.iau.ir
In this study, polyamide 6 (PA6)/nitrile butadiene rubber (NBR) based hybrid-
nanocomposites reinforced with calcium carbonate and organo-clay as nanofillers in various …
nanocomposites reinforced with calcium carbonate and organo-clay as nanofillers in various …
An interesting phase transition in polyamide 6/nitrile rubber blend induced by temperature and pressure and its effect on tribological performance
S Sun, D Nie, Y Zhang, Z Cai - Journal of Applied Polymer Science - Wiley Online Library
The preparation of high‐performance rubber‐plastic blending elastomers has always been
a research hotspot in the field of petroleum equipment. The two‐phase separation structure …
a research hotspot in the field of petroleum equipment. The two‐phase separation structure …
Mechanical and Rheology Properties of PLA/ABS/TCS Polymer Blends
B Ramanjaneyulu, N Venkatachalapathi… - Materials Science …, 2021 - Trans Tech Publ
Binary and ternary blends of poly lactic acid (PLA), acrylonitrile-butadiene-styrene (ABS)
and tapioca cassava starch (TCS) were prepared by the help of melt blend method …
and tapioca cassava starch (TCS) were prepared by the help of melt blend method …