Single-frequency fiber amplifiers for next-generation gravitational wave detectors

M Steinke, H Tünnermann, V Kuhn… - IEEE Journal of …, 2017 - ieeexplore.ieee.org
At the beginning of 2016, the first direct detection of a gravitational wave by a laser-based
Michelson interferometer has been reported. So far, the number of confirmed detections has …

Polymer/silica hybrid waveguide amplifier at 532 nm based on NaYF4:Er3+, Yb3+ nanocrystals

T Sun, Y Fu, Z Cao, S Tao, J Yan, D Zhao, D Zhang… - Optics Letters, 2021 - opg.optica.org
An optical waveguide amplifier, which can solve the problem of optical attenuation in optical
network transmission, is the key technology to solve optical chip integration and optical …

Gain enhancement of polymer waveguide amplifier based on NaYF4: Er3+, Yb3+ nanocrystals using backward pump scheme

T Sun, Y Fu, X Zhang, J Yan, F Wang, D Zhang - Optics Communications, 2021 - Elsevier
Optical waveguide amplifiers based on NaYF 4: Er 3+, Yb 3+ nanocrystals prepared by high-
temperature thermal decomposition method with forward and backward pump schemes are …

Highly efficient Er/Yb-codoped fiber amplifier with an Yb-band fiber Bragg grating

Q Han, Y Yao, Y Chen, F Liu, T Liu, H Xiao - Optics Letters, 2015 - opg.optica.org
In this Letter, a high-power Er/Yb-codoped fiber amplifier (EYDFA) with a high-reflection Yb-
band fiber Bragg grating (FBG) at the pump end is experimentally investigated. The FBG …

10 W single-mode Er/Yb co-doped all-fiber amplifier with suppressed Yb-ASE

G Sobon, D Sliwinska, KM Abramski… - Laser Physics …, 2014 - iopscience.iop.org
In this work we demonstrate a single-frequency, single-mode all-fiber master oscillator
power amplifier (MOPA) source, based on erbium–ytterbium co-doped double-clad fiber …

[HTML][HTML] All-optical output power stabilization of double-clad Er: Yb amplifiers using 1064 nm signal injection

P Bojęś, K Krzempek - Optics & Laser Technology, 2025 - Elsevier
We present a novel technique for all-optical stabilization of the output power of telecom band
amplifiers based on double-clad (DC) erbium-ytterbium (Er: Yb) doped fibers. The proposed …

Co-seeded Er3+:Yb3+ single frequency fiber amplifier with 60 W output power and over 90% TEM00 content

M Steinke, A Croteau, C Paré, H Zheng, P Laperle… - Optics express, 2014 - opg.optica.org
We report on the design and fabrication of an Er^ 3+: Yb^ 3+ triple clad fiber and on the
power scaling of a single frequency fiber amplifier at 1.5 μm based on that fiber. In addition …

Numerical methods for high-power Er/Yb-codoped fiber amplifiers

Q Han, T Liu, X Lü, K Ren - Optical and Quantum Electronics, 2015 - Springer
We present effective methods for the numerical simulation of high-power-pumped
continuous-wave (CW) and pulsed erbium–ytterbium-codoped fiber amplifiers (EYDFAs) …

Optimal design of Er/Yb co-doped fiber amplifiers with an Yb-band fiber Bragg grating

Q Han, W Yan, Y Yao, Y Chen, T Liu - Photonics Research, 2016 - opg.optica.org
In this paper, Er/Yb co-doped fiber amplifiers (EYDFAs) with an Yb-band fiber Bragg grating
(FBG) at the pump end to improve the performance of the amplifier is systematically studied …

18 W single-frequency 1550 nm Er: Yb co-doped fiber amplifier cladding-pumping at 1018 nm

S Wang, Z Liu, Z Zhao, S Qu, Y Xie, X Gao… - Optics Communications, 2020 - Elsevier
A continuous wave (CW) 1550 nm single-frequency fiber amplifier based on a double-clad
Er: Yb co-doped fiber, featuring off-peak cladding-pumping at 1018 nm, is demonstrated for …