[HTML][HTML] On the structural parameters of honeycomb-core sandwich panels against low-velocity impact
This paper presents a combined experimental and numerical study on the low-velocity
impact behavior of honeycomb-core sandwich panels with different structural parameters …
impact behavior of honeycomb-core sandwich panels with different structural parameters …
[HTML][HTML] Calibration of the modified Mohr-Coulomb fracture model by use of localization analyses for three tempers of an AA6016 aluminium alloy
This paper presents a novel calibration procedure of the modified Mohr-Coulomb (MMC)
fracture model by use of localization analyses and applies it for three tempers of an AA6016 …
fracture model by use of localization analyses and applies it for three tempers of an AA6016 …
[HTML][HTML] Experimental and numerical penetration response of laser-welded stiffened panels
Ductile fracture in large structures is often resolved with non-linear finite element (FE)
simulations employing structural shell elements which are larger than localization zone. This …
simulations employing structural shell elements which are larger than localization zone. This …
Simulation of ship collision and grounding damage using Hosford-Coulomb fracture model for shell elements
The predictive capabilities of the Hosford-Coulomb ductile fracture model for shell elements
were evaluated by simulating the penetration of stiffened panel test models. The plasticity …
were evaluated by simulating the penetration of stiffened panel test models. The plasticity …
[HTML][HTML] A submodeling technique for incorporating sheet metal forming effects in an AA5083 FPV structure
While the first generation of floating photovoltaics (FPV) was designed for operation in
freshwater reservoirs, the technology is currently expanding to marine territories. In this …
freshwater reservoirs, the technology is currently expanding to marine territories. In this …
[HTML][HTML] Testing and simulation of additively manufactured AlSi10Mg components under quasi-static loading
An experimental and numerical study on the quasi-static loading of AlSi10Mg square boxes
produced by selective laser melting (SLM) was carried out. The goal was to evaluate the …
produced by selective laser melting (SLM) was carried out. The goal was to evaluate the …
A through-thickness damage regularisation scheme for shell elements subjected to severe bending and membrane deformations
This research work proposes and validates a damage regularisation model for shell
elements used in large-scale simulations. The model evaluates the ratio of bending to …
elements used in large-scale simulations. The model evaluates the ratio of bending to …
[图书][B] Advanced steel design of structures
S Chandrasekaran - 2019 - taylorfrancis.com
Advanced Steel Design of Structures examines the design principles of steel members
under special loads and covers special geometric forms and conditions not typically …
under special loads and covers special geometric forms and conditions not typically …
[HTML][HTML] Experimental and numerical study on the tensile ductility of an aluminium alloy with heat-affected zones
In the case of aluminium structures, welding may introduce weak zones, so-called heat-
affected zones (HAZ), close to the weld. Such zones should be accounted for when …
affected zones (HAZ), close to the weld. Such zones should be accounted for when …
Material failure criterion in the finite element analysis of aluminium alloy plates under low-velocity impact
B Liu, C Chen, Y Garbatov - Ocean Engineering, 2022 - Elsevier
A material failure criterion, based on the combination of the revised Bressan-Williams-Hill
(BWH) local instability criterion and damage evolution model, is presented to analyse …
(BWH) local instability criterion and damage evolution model, is presented to analyse …