Quasicrystalline materials constitute a new materials group with certain crystalline structural
characteristics, such as the generation of Bragg peaks in the X-ray data and points in the …

Synthesis of nanomaterials by a simple, low cost and in high yield has been a great
challenge since the very early development of nanoscience. Various bottom and top down …

The last decade has witnessed an intensive research in the field of nanocrystalline materials
due to their enhanced properties. A lot of processing techniques were developed in order to …

A set of Cu-based powder mixtures containing up to 8 at.% Mo has been processed through
mechanical alloying for a range of milling times up to 75 h. The milling operation was carried …

The influence of mechanical milling (MM), primarily on microstructure and phase evolution in
Al 62.5 Cu 25 Fe 12.5 (at%) quasicrystalline (IQC) matrix reinforced with varying volume …

Quasicrystalline (QC) powder was prepared by mechanical alloying and subsequent
annealing of Al 65 Cu 23 Fe 12 composition. Obtained quasicrystals were milled together …

Non‐equilibrium processing and other related techniques can activate quasicrystalline
structures to a higher energy level and enable them to attain various stable/metastable …

This work is devoted to the preparation of ultrafine material based on Al–Cu–Fe
quasicrystalline phase by powder metallurgy using mechanical alloying and Spark Plasma …

In this study, the Al 59 Cu 25.5 Fe 12.5 B 3 nanoquasicrystalline alloy and related crystalline
phases were synthesized through mechanical alloying using a high-energy ball milling and …

An elemental powder mixture with a nominal composition of Al65Cu20Fe15 was
mechanically milled for times of up to 8h. Subsequent annealing of as-milled powders was …